Home

This website runs on green hosting - verified by thegreenwebfoundation.org

P.S.A.1.  PRODUCTION OF NANOMATERIALS FOR PHYSICAL/CHEMICAL METHODS OF FLUID FILTERING
Suzana Gotovac Atlagić1, Marko Čađo1, Siniša M. Vučenović2, Igor J. Šetrajčić3, Jovan P. Šetrajčić3
1
University of Banja Luka, Faculty of Technology, Banja Luka, Republic of Srpska, BiH
2University of Banja Luka, Faculty of Natural Sciences, Banja Luka, Republic of Srpska, BiH
3University of Novi Sad, Faculty of Sciences, Department of Physics, Novi Sad, Vojvodina, Serbia

P.S.A.2.  DOPED CALCIUM COBALTITES: THE SYNTHESIS APPROACH
Eva Bartonickova, Alzbeta Jebava, Jiri Masilko, Lukas Kalina, Jakub Tkacz, Jaromir Havlica
Materials Research Centre, Faculty of Chemistry, Brno University of Technology, Brno Czech Republic

P.S.A.3.  Alternative Synthesis of Certain Compounds of Perovskite-type for Piezoelectric Transducers
Piotr Dulian1, Wojciech Bąk2, Krystyna Wieczorek-Ciurowa1, Czesław Kajtoch2
1
Faculty of Chemical Engineering and Technology, Cracow University of Technology, 24, Warszawska Str., 31-155 Cracow, Poland
2Institute of Physics, Pedagogical University, 2, Podchorążych Str., 30-084 Cracow, Poland

P.S.A.4.  Evaluation of inhibition efficiency of talloil diethylenetriamine imidazoline as corrosion inhibitor for top of the line corrosion of mild steel in multiphase flow environment
Ivana Jevremović1, Marc Singer2, Srđan Nešić2, Vesna Mišković-Stanković1
1
Faculty of Technology and Metallurgy, Belgrade, Serbia
2Institute for Corrosion and Multiphase Technology, Ohio University, Athens, USA

P.S.A.5.  EFFECT OF THERMAL AGING OF ETHYLENE-VINYL ACETATE COPOLYMER (EVA) ON ADHESIVE PROPERTIES FOR OPTICAL FIBERS FIXATION
Nataša Z. Tomić1, Bojan I. Međo2, Kata Trifković1, Dušica B. Stojanović2, Vesna J. Radojević2, Marko P. Rakin2, Radmila M. Jančić-Heinemann2, Radoslav R. Aleksić2†
1
University of Belgrade, Innovation Center of Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia
2University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia

P.S.A.6.  SYNTHESIS AND STRUCTURE OF COBALT(III) COMPLEX WITH PYRIDOXYLIDENEAMINOGUANIDINE
Marko V. Rodić, Mirjana M. Radanović, Ljiljana S. Vojinović-Ješić, Vukadin M. Leovac
Faculty of Sciences, University of Novi Sad, Serbia

P.S.A.7.  The kinetic energy dependence of association reactions for alkali metal ions with dimethoxyethane
Milica Petrović, Martina Gilić, Vladimir Stojanović, Željka Nikitović, Zoran Raspopović, Nebojša Romčević
Institute of Physics, University of Belgrade, Belgrade, Serbia

P.S.A.8.  Electroless deposition of Ni-P coating on wrought Mg-3Al-1Zn magnesium alloys
J. Wasserbauer1, P. Kosár1, M. Buchtík1, P. Doležal1,2
1
Brno University of Technology, Faculty of Chemistry, Materials Research Centre, Purkynova 118, 612 00 Brno, Czech Republic
2Brno University of Technology, Faculty of Mechanical Engineering, Institute of Material Science and Engineering, Technicka 2, 616 69 Brno, Czech Republic

P.S.A.9.  Preparation of cordierite ceramic materials starting from natural raw materials
Khaled Boumchedda, Said Debbakh, Bahia Rebahi, Tahar Aouroun
UR-MPE, FSI, University of Boumerdes, 35000 Boumerdes, Algeria

P.S.A.10.  Complexes of Ru(II) with N-alkylphenothiazines – biological assay
Milena P. Krstić1, Sunčica M. Borozan1, Sofija P. Sovilj2, Sanja Grgurić-Šipka2
1
Faculty of Veterinary Medicine, University of Belgrade, Bulevar oslobodjenja 18, 11000 Belgrade, Serbia, 2Faculty of Chemistry, University of Belgrade, P.O. Box 158, 11001 Belgrade, Serbia

P.S.A.11.  TRANSPORT PARAMETERS OF Ne+ IN CF4 FOR TECHNOLOGICAL APPLICATIONS
Željka Nikitović, Zoran Raspopović and Vladimir Stojanović
Institute of Physics, University of Belgrade, Belgrade, Serbia

P.S.A.12.  Influence of point defects concentration on densification process and optical properties of sintered ZnO ceramics
Smilja Marković1, Ana Stanković1, Ljiljana Veselinović1, J. Belošević-Čavor2, Srečo Škapin3, S. Stojadinović4, V. Rac5, S. Lević5, I. Janković-Častvan6 and Dragan Uskoković1
1
Institute of Technical Sciences of SASA, Belgrade, Serbia
2The Vinča Institute of Nuclear Sciences, University of Belgrade, 11001 Belgrade, Serbia
3Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia
4Faculty of Physics, University of Belgrade, Belgrade, Serbia
5Faculty of Agriculture, University of Belgrade, Zemun, Serbia
6Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia

P.S.A.13.  SYNTHESIS AND CHARACTERISATION OF POWDER METALLURGY BULK MAGNESIUM
Matěj Březina1, Pavel Doležal1,2, Josef Zapletal2, Jaromír Wasserbauer1, Veronika Ruttkayová1
1
Brno University of Technology, Faculty of Chemistry, Materials Research Centre, Purkynova 118, 612 00 Brno, Czech Republic
2Brno University of Technology, Faculty of Mechanical Engineering, Institute of Material Science and Engineering, Technicka 2, 616 69 Brno, Czech Republic

P.S.A.14.  The gamma-irradiation effect on sintering and properties of zirconia ceramics
Olga S. Antonova1, Valeriy V. Smirnov1, German P. Kochanov1, Ludmila I. Shvorneva1, Alexey A. Zanin2, Sergey M. Barinov1
1
Baikov’ Institute of Metallurgy and Material Science RAS, Moscow, Russia
2D. Mendeleev Univercity of Chemical Technology of Russia, Moscow, Russia

P.S.A.15.  Modeling the influence of synthesis parameters and termal effects on magnetic properties of pressed powder system FexOyBaTiO3
Dejan Vujičić1, Dušan Marković2, Danijela Milošević1, Slobodan Đukić1
1
Faculty of Technical Sciences Čačak, 2Faculty of Agronomy Čačak, Serbia

P.S.A.16.  ANALYSIS OF STRESS DISTRIBUTION IN THE CASE OF SCARF JOINT OF TWO COMPOSITE MATERIALS

Abdurrahman O. Houssein1, Mohamed Mokhter Omar Abukhres2
1
Aljabel Algharbi University, Al Zentan engineering Faculty, Lybia
2Aljabel Algharbi University, Lybia

P.S.A.17  Application of new composites for Fused Deposition Modeling (FDM) technology in wood industry
Nenad Grujović1, Dragan Šljivić2, Miroslav Živković1, Fatima Živić1, Andreja Radovnanović1, Miloš Mladenović1
1
Faculty of Engineering, University of Kragujevac, Serbia
2Faculty of Mechanical Engineering, University of Banja Luka, RS-BIH

P.S.A.18.  TUNING ELECTRONIC PROPERTIES OF TRANSITION METAL DICHALCOGENIDES BY A HETEROVALENT DOPING IN METAL SUBLATTICE
Alexandra Yu. Ledneva, Sofya B. Artemkina, Mariia N. Kozlova, Anatoly I. Romanenko, Vladimir E. Fedorov
1Nikolaev Institute of Inorganic Chemistry SB RAS, Novosibirsk, Russia
2Novosibirsk State University, Novosibirsk, Russia

Meeting Calendar

2025

16th Pacific Rim Conference on Ceramic and Glass Technology including Glass & Optical Materials Division Meeting (GOMD 2025)
https://ceramics.org/event/16th-pacific-rim-conference-on-ceramic-and-glass-technology-including-glass-optical-materials-division-meeting-gomd-2025/
May 4 - 9, 2025, Vancouver, British Columbia, Canada

 1st International Caparica Conference on Science Education 2025
https://sciedu2025.com/
May 4 -7, 2025, Caparica, Portugal

MIT Predictive Multiscale Materials Design Short Course
An in-person, high-impact program featuring deep technical lectures, hands-on labs, interactive clinics, and networking events
https://professional.mit.edu/course-catalog/predictive-multiscale-materials-design
June 2–6, 2025, MIT Campus, Cambridge, MA, USA

 
The UK'S Definitive Industrial 3D Printing and Additive Manufacturing
https://tct3sixty.com/newfront
June 4 and 5, 2025,  Birmingham, UK


ICCCI 2025 - The 8th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and
60th Summer Symposium on Powder Technology

https://ceramics.ynu.ac.jp/iccci2025/
July 8-11, 2025, Fujiyoshida, Japan


Advanced nanomaterials conference, ANM 2025
https://www.advanced-nanomaterials-conference.com/
July 23-25, 2025, University of Aveiro, Portugal
 

AMSE 2025 The International Conference on Advanced Materials Science and Engineering (AMSE) 
https://amse.net/ 
July 23-25, 2025, Okinawa, Japan
 

AAAFM-UCLA International Conference on Advances in Functional Materials 
https://aaafm.org/ucla2025/
August 4-6, 2025, UCLA, CA, USA

METALLURGY2025, The Global Summit on Metallurgical Engineering and Mineral Processing 
https://metallurgical.researchconnects.org/
August 4–6, 2025, Frankfurt, Germany

35th International Conference on Diamond and Carbon Materials (ICDCM 2025)
https://www.elsevier.com/events/conferences/all/international-conference-on-diamond-and-carbon-materials 
31 August – 4 September, 2025, Glasgow, UK

26th YUCOMAT Annual Conference on Material Science 
https://www.mrs-serbia.org.rs/index.php/yucomat/yucomat-2025 
September 1-5, 2025, Herceg Novi, Montenegro
 

18th European Congress and Exhibition on Advanced Materials and Processes
https://euromat2025.com/
September 14-18, 2025, Granada, Spain
 

15th EASN International Conference
https://easnconference.eu/
October 14-17, 2025, Madrid, Spain

MRS Fall Meeting 2025
https://www.mrs.org/meetings-events/annual-meetings/2025-mrs-fall-meeting 
November 30-December 5, 2025, Boston, Massachusetts

2025 Asian Federation for Pharmaceutical Sciences (AFPS) Conference 
https://www.afps2025.org/
3 to 5 December 3 - 5, 2025, University of Sydney, Australia. 

 

2026

27th YUCOMAT Annual Conference on Material Science
https://www.mrs-serbia.org.rs/index.php/yucomat/27th-yucomat-2026
August 31 - September 04, 2026, Herceg Novi, Montenegro

Sintering 2026 The International Conference on Sintering
https://www.sintering2026.org/en
31 August - 3 September 2026 in Aachen, Germany  

 

2027

28 YUCOMAT Conference and 14 WRTCS Conference
August 30 - September 03, 2027, Herceg Novi, Montenegro

member since 2008