Chairmen: Peter Franz Rogl and Mamoru Senna

09⁰⁰-09³⁰
Application of experimental and computational approaches to explore non-conventional transformation pathways resulting in refined microstructures in beta-stabilized titanium alloys
Hamish L Fraser
The Ohio State University, Columbus, Ohio, USA

09³⁰-10⁰⁰
Deformation Mechanisms in Superalloys: New Insights from STEM-Based Imaging and Spectroscopy
Tim Smith, Connor Slone, G. Babu Viswanathan, Michael J. Mills
The Ohio State University, Center for Electron Microscopy and Analysis (CEMAS), Columbus, OH, USA

10⁰⁰-10³⁰
Characterization of the Deformation Mechanisms in High-Mn Austenitic Steels
James E. Wittig
Materials Science and Engineering, Vanderbilt University, Nashville, Tennessee, USA

10³⁰-11⁰⁰
NANOTWINNED STRUCTURES IN NANOMATERIALS: PREPARATION, PROPERTIES AND APPLICATION
Rostislav A, Andrievski
Institute of Problems of Chemical Physics, Russian Academy of Sciences, Chernogolovka, Moscow Region, Russia

Break: 11⁰⁰-11³⁰

Chairmen: Hamish L. Fraser and Michael Mills

11³⁰-12⁰⁰
Thermoelectric Materials for automotive applications
Peter Rogl^1,2, Gerda Rogl^1,2,3, Andriy Grytsiv^1,2,3, Ernst Bauer^1,3
1Christian Doppler Laboratory for Thermoelectricity, Wien, Austria
²Institute of Physical Chemistry, University of Vienna, Währingerstrasse 42, A-1090 Wien, Austria
³Institute of Solid State Physics, Vienna University of Technology, Wiedner Hauptstrasse 8-10, A-1060 Wien, Austria

12⁰⁰-12³⁰
Alkali Metal-Containing Complex Oxide Nanoparticles for Advanced Materials
Mamoru Senna
Faculty of Science and Technology, Keio University, Yokohama, Japan

P.S.C.1.  Tailoring Surface Plasmon Resonance (SPR) of Bimetallic Ag/Au Nanoparticles Through their Composition and Assembly

Manca Logar¹, Tilen Sever², Boštjan Jančar²                

¹Laboratory for chemistry of materials, National Institute of Chemistry, Slovenia
²Advanced Materilas Department, Jozef Stefan Institute, Slovenia

P.S.C.2.  Alignment of MoS₂ Nanotubes in a Photopolymerizable Liquid–Crystalline Material
Aleš Mrzel¹, Blaž Tasič¹, Miro Huskič², Irena Drevenšek-Olenik^1,3
1Jozef. Stefan Institute, Jamova 39, SI 1000 Ljubljana, Slovenia
²National Institute for Chemistry, Hajdrihova 19, SI 1001, Ljubljana, Slovenia
³Faculty of Mathematics and Physics, University of Ljubljana, Jadranska 19, SI 1000 Ljubljana, Slovenia

P.S.C.3.  Platinum Nanocatalysts at Titanium Oxide Based Supports for Low Temperature Fuel Cell Applications
Ljiljana M. Gajić Krstajić¹, Nevenka R. Elezović², Biljana M. Babić³, Velimir R. Radmilović⁴, Nedeljko V. Krstajić^4
1Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Knez Mihailova 35, Belgrade, Serbia
²Institute for Multidisciplinary Research, University of Belgrade, Belgrade, Serbia
³Vinča Institute of Nuclear Sciences, University of Belgrade, Serbia
⁴Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia

P.S.C.4.  Shape evolution of carbon supported Pt catalyst for PEMFC
Mila N. Krstajić¹, Sanja I. Stevanović¹, Vuk V. Radmilović², Aleksandra Gavrilović-Wohlmuther³, Velimir R. Radmilović^4,5, Snežana Lj. Gojković⁴, Vladislava M. Jovanović^1
1ICTM, Department of Electrochemistry, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia
²Innovation Center, Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia
³CEST Centre of Electrochemical Surface Technology, Viktor-Kaplan Strasse 2, 2700 Wiener Neustadt, Vienna, Austria
⁴Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia
⁵Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000 Belgrade, Serbia

P.S.C.5.  Photocatalytic degradation of the propranolol hydrochloride in natural water using titania-based nanoparticles
Sanja J. Armaković¹, Daniela V. Šojić¹, Marija Radoičić², Mirjana I. Čomor², Biljana F. Abramović^1
1University of Novi Sad, Department of Chemistry, Biochemistry and Environmental Protection, Faculty of Sciences, Trg Dositeja Obradovića 3, 21000 Novi Sad, Serbia
²Institut za nuklearne nauke Vinča, 11001 Beograd, PO Box 522, Republika Srbija

P.S.C.6.  Synthesis, characterisation and photocatalytic properties of two novel nanocomposites: TiO₂ Hombikat with fullerene nC60 and with fullerenol C₆₀(OH)₂₄ nanoparticles
Ivana Borišev¹, Igor Medić¹, Daniela Šojić¹, Biljana Abramović¹, Marina Lazarević¹, Marina Delić¹, Danica Jović¹, Vladimir Srdić², Aleksandar Djordjević^1
1 University of Novi Sad, Faculty of Sciences, Department for Chemistry, Biochemistry and Environmental Protection, Trg Dositeja Obradovića 3, Novi Sad, Serbia
² University of Novi Sad, Faculty of Technology, Bulevar Cara Lazara 1, Novi Sad, Serbia

P.S.C.7.  Synthesis of Sulphur Nanoparticles by Mechanochemical Route in the System Na₂S₂O₃−H₂(C₄H₄O₄)−Na₂SO₃
Dinar Zharlyrkasimova¹, Mukhambetkali Burkitbayev¹, Bolat Uralbekov¹, Farit Urakaev^2
1al-Farabi Kazakh National University, Almaty, Kazakhstan
²V.S. Sobolev Institute of Geology and Mineralogy SB RAS, Novosibirsk, Russia

P.S.C.8.  Hydrolytic Stability of Nanosilica-Based Urea-Formaldehyde Composite with Different Coumarine Derivates as Scavemgers of the Formaldehyde
Vojislav Jovanović¹, Branka Petković¹, Suzana Samaržija-Jovanović¹, Biljana Dekić¹, Vidoslav Dekić¹, Gordana Marković², Milena Marinović-Cincović^3
1Faculty of Natural Science and Mathematics, University of Priština, Kosovska Mitrovica, Serbia
²Tigar, Pirot, Serbia
³Institute of Nuclear Science Vinča, University of Belgrade, Belgrade, Serbia

P.S.D.1.  INVESTIGATION OF ADSORPTION OF COPPER IONS BY POPLAR WOOD SAWDUST AND LIGNIN
Marina Šćiban, Dragana Kukić, Jelena Prodanović, Vesna Vasić
University of Novi Sad, Faculty of Technology Novi Sad, Bul. Cara Lazara 1, 21000 Novi Sad, Serbia

P.S.D.2.  

FRICTION AND AERODYNAMIC OFFSET OF CUP ANEMOMETER
Miodrag Zlatanović¹, Ivan Popović^2
1Wind Electricity doo, Belgrade, Serbia
²School of Electrical Engineering, Belgrade, Serbia

P.S.D.3.  NEWER METHODS OF WASTE DISPOSAL FROM THERMAL POWER PLANTS
Jelena Mitić¹, Oliver Dimitrijević², Miodrag Smelcerovi^ć1, Dragan Djordjević^3
1Higher school of textile studies, Leskovac, Serbia
²Higher school of medical studies ‘Hipokrat‘, Bujanovac, Serbia
³Faculty of Technology, Leskovac, Serbia

P.S.E.1.  Bone Cements Based on Calcium Phosphate-Magnesium Phosphate System with (Ca+Mg)/P = 2
Goldberg M.A., Smirnov S.V., Smirnov V.V., Antonova O.S., Shvorneva L.I., Kutsev S.V., Barinov S.M.
Baikov’ Institute of Metallurgy and Materials Science RAS, Moscow, Russia

P.S.E.2.  Synthesis, Characterization and Antimicrobial Activity of Ni(II) Complexes with Condensation Product of 2-(Diphenylphosphino)Benzaldehyde and Girard’s T Reagent
Božidar Čobeljić¹, Milica Milenković¹, Gabrijela Bradjan¹, Dušan Sladić¹, Marina Milenković² and Katarina Andjelković^1
1Faculty of Chemistry, University of Belgrade, Studentski trg 12–16, 11000 Belgrade, Serbia
²Department of Microbiology and Immunology, Faculty of Pharmacy, University of Belgrade, Vojvode Stepe 450, Serbia

P.S.E.3.  Crosslinked electrospun chitosan/PEO nanofibers for wound healing application
Mirjana Grković¹, Anđela Radisavljević¹, Dušica B. Stojanović², Aleksandar Kojović², Mirjana Rajilić-Stojanović², Igor Balać³, Vladimir Pavlović⁵, Miloš Bjelović⁴, Petar S.Uskoković^2
1University of Belgrade, Innovation Centre Faculty of Technology and Metallurgy, Belgrade, Serbia
²University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
³University of Belgrade, Faculty of Mechanical Engineering, Belgrade, Serbia
⁴University of Belgrade, Faculty of Medicine, Belgrade, Serbia, ⁵University of Belgrade, Faculty of Agriculture, Belgrade, Serbia,

P.S.E.4.  Development of multifunctional Oxaprozin/poly(2-hydroxypropyl acrylate/itaconic acid) delivery system
Marija M. Babić, Bojan Dj. Božić, Katarina M. Antić, Jovana S. Vuković, Marija D. Perišić, Jovanka M. Filipović, Simonida Lj. Tomić
Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, Belgrade, Serbia

P.S.E.5. The influence of gradient copolymerisation poly(oligo(propylene glycol) methacrylate) hydrogels with 2-hydroxyethyl methacrylate on thermoresponsive properties
Maja Mićić, Zorana Rogić Miladinović, Dejan Milicević, Edin Suljovrujić
Vinca Institute of Nuclear Sciences, University of Belgrade, PO Box 522, 11001 Belgrade, Serbia

P.S.E.6.  Evaluation of Nano-Particulate Bioactive-Glass Reinforced Gellan-Gum Hydrogel Regarding the Formation of Hydroxyapatite under Shear Stress
Jovana Zvicer¹, Ana Gantar^2,3, Djordje Veljović¹, Saša Novak^2,3, Bojana Obradović^1
1Faculty of Technology and Metallurgy, University of Belgrade, Serbia
²Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia
³Jožef Stefan International Postgraduate School, Ljubljana, Slovenia

P.S.E.7.  Formation Mechanism of Biocompatible Fluoride Conversion Coating on AZ31 Magnesium Alloy
Juliána Drábiková, Jaromír Wasserbauer, Martin Zmrzlý
Brno University of Technology, Faculty of Chemistry, Materials Research Centre, Purkynova 118, 612 00 Brno, Czech Republic

P.S.E.8.  Squeeze cast AZ31 magnesium alloy long term degradation analysis in Hanks' solutions
Pavel Doležal^1,2, Helena Doležalová Weissmannová¹, Jaromír Wasserbauer¹, Sylvia Dundeková³, Branislav Hadzima³, Ivana Modráčková^1
1Brno University of Technology, Faculty of Chemistry, Materials Research Centre, Purkynova 118, 612 00 Brno, Czech Republic
²Brno University of Technology, Faculty of Mechanical Engineering, Institute of Material Science and Engineering, Technicka 2, 616 69 Brno, Czech Republic³Research Centre of the University of Zilina, Univerzitná 1, 010 26 Zilina, Slovak Republic

P.S.E.9.  INFLUENCE OF COEFICIENT OF FRICTION AND CONTACT AREA ON PROSTHESES-IMPLANT RETENTION FORCE             

Igor Balać¹, V. Buljak1, S. Pandey¹, V. Lojpur^2
1Faculty of Mechanical Engineering, University of Belgrade, Belgrade, Serbia
²Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia