Tuesday, September 1, 2026

First Poster Session, National Restaurant Jadranka Terrace
Competition for the best poster presentation by young researchers

Book of Abstracts

Session I: 08⁰⁰ - 09³⁰
Chairpersons: Sonja Jovanović, Đorđe Veljović

SYMPOSIUM A: ADVANCED METHODS IN SYNTHESIS AND PROCESSING OF MATERIALS

P.S.1.
Physical synthesis platform for novel thin-film materials at MTF STU Trnava, Slovakia
Filip Ferenčík, Mariana Derzsi, Richard Antala, Pavol Noga
Slovak University of Technology, Faculty of Materials Science and Technology in Trnava, Advanced Technologies Research Intitute, Jána Bottu 25, Trnava, 91922, Slovakia

P.S.2.
Development of a method of refining the Sn-Sb phase in the matrix of the SnSb11Cu6 bearing alloy
Marcin Maleta, Anna Brudny, Beata Cwolek, Joanna Hrabia-Wiśnios, Joanna Kulasa
Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland

P.S.3.
The effect of rare earth metal addition on the microstructure and properties of SnSb11Cu6 bearing alloy
Anna Brudny, Marcin Maleta, Beata Cwolek, Joanna Kulasa, Joanna Hrabia-Wiśnios
Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland

P.S.4.
Waste polystyrene-derived nitrogen-doped amorphous carbon as an anode material for lithium-ion batteries
Aizhuz Sarsengaliyeva¹, Arailym Nurpeissova^1,2 
1Institute of Batteries (IoB), Kabanbay batyr ave. 53, Astana, 010000, Kazakhstan, ²Institute of New Materials and Energy Technologies, Kabanbay batyr ave. 53, Astana, 010000, Kazakhstan

P.S.5.
Preparation of ZnFe₂O₄ by mechanochemical/thermal routes and its electrochemical properties
Olena Porodko¹, Martin Fabián¹, Jaroslav Briančin¹, Maksym Lisnichuk² and Markéta Zukalová^3
1Institute of Geotechnics, Slovak Academy of Sciences, Watsonova 45, 040 01, Košice, Slovak Republic, ²Institute of Physics, Pavol Jozef Šafárik University, Park Angelinum 9, 04154 Košice, Slovak Republic, ³J. Heyrovský Institute of Physical Chemistry, Czech Academy of Sciences, Dolejškova 3, CZ-18200, Prague 8, Czech Republic

YUCOMAT SYMPOSIUM B: ADVANCED MATERIALS FOR HIGH-TECHNOLOGY APPLICATION

P.S.6.
Comparative study of CaVO400/C and MgVO400/C electrodes for aqueous Ca- and Mg-ion storage
Tamara Petrović¹, Miloš Milović², Milica Vasić¹, Jana Mišurović³, Slavko Mentus^1,4, Milica Vujković^1,5
1University of Belgrade - Faculty of Physical Chemistry, Belgrade, Serbia, ²Vinča Institute of Nuclear Sciences - University of Belgrade, Serbia, ³University of Montenegro, Faculty of Metallurgy and Tech­no­logy, Podgorica, Montenegro, ⁴Serbian Academy of Sciences and Arts, Belgrade, Serbia, ⁵The Centre for Interdisciplinary and Multidisciplinary Studies, University of Montenegro, Podgorica, Montenegro

P.S.7.
Interface-engineered NiCoMn/polyaniline nanofiber networks for efficient hydrogen evolution and high-performance supercapacitors
Alkesh B. Patel^{1, 2}, Payal Chauhan², Jan Plutnar², Zdenek Sofer², Patrycja Bober^1
1Institute of Macromolecular Chemistry, Czech Academy of Sciences, Prague 6, 162 00, Czech Republic, ²Department of Inorganic Chemistry, University of Chemistry and Technology Prague, Technická 5, Prague 6, 166 28, Czech Republic

P.S.8.
Ru single atom decorated ZnCo₂O₄ for efficient oxygen evolution electrocatalysis
Payal Chauhan, Alkesh Patel, Bing Wu, Zdenek Sofer
Department of Inorganic Chemistry, University of Chemistry and Technology Prague, Technická 5, 166 28 Prague, Czech Republic

P.S.9.
Stripping induced failure mechanisms in Li-metal solid state batteries
Jan Jerovšek^1,2, Sara Drvarič Talian¹, Gregor Kapun¹, Robert Dominko^1,2
1Department of Materials Chemistry, National Institute of Chemistry, Ljubljana, Slovenia, ²Faculty of Chemistry and Chemical Technology, University of Ljubljana, Ljubljana, Slovenia

P.S.10.
Spin configurations in NiO beyond the ground state
R. Bujdák¹, D. Fabušová¹, K. Tokár^1,2, M. Derzsi^1
1Advanced Technologies Research Institute, Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, 917 24 Trnava, Slovakia, ²Institute of Physics, Slovak Academy of Sciences, 845 11 Bratislava, Slovakia

P.S.11.
The role of crystalline quality and interface engineering on the performance of STO-protected Si photocathodes
Darija Petković¹, Hsin-Chia Ho², Janez Kovač³, Matjaž Spreitzer², Lucija Bučar², Sonja Jovanović¹, Damjan Vengust², Zoran Jovanović^1
1Laboratory of Physics, Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia, ²Advanced Materials Department, Jožef Stefan Institute, Ljubljana, Slovenia, ³Department of Surface Engineering, Jožef Stefan Institute, Ljubljana, Slovenia

P.S.12.
Fractional dialysis as a critical separation approach for structural isolation of lignin-derived carbon nanodots
Albina Mikhraliieva^1,2, Volodymyr Zaitsev², Yevgen Karpichev^1
1Department of Chemistry and Biotechnology, Tallinn University of Technology, Tallinn, Estonia, ²Department of Chemistry, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro, Brazil

P.S.13.
Germanium reconstruction types at Ge/SrTiO₃ interface
Lucija Bučar^1,2, Nina Daneu¹, Binayak Mukherjee³, Philippe Ghosez³, Matjaž Spreitzer^1
1Advanced Materials Department, Jozef Stefan Institute, Ljubljana, Slovenia, ²Jožef Stefan International Postgraduate School, Ljubljana, Slovenia, ³Theoretical Materials Physics, Q-MAT, Université de Liège, Liège, Belgium

P.S.14.
Understanding the liquid phase interaction between Ti-TiB₂, Ti-ZrB₂ or Ti-HfB₂ with Ti64 for creating composite materials by 3D printing
Dmytro Vedel, Oleksandr Stasiuk, Vasyl Nevmerzhytsky
G.V. Kurdyumov Institute for Metal Physics of N.A.S. of Ukraine, 36, Academician Vernadsky Boulevard, Kyiv, UA-03142, Ukraine

YUCOMAT SYMPOSIUM C: NANOSTRUCTURED MATERIALS

P.S.15.
Flexible electronics sensor component based on screen‑printed Sm₂Zr₂O₇/graphene composite for VOC sensing
Jelena Đerić¹, Branko Matović², Zorica Novaković¹, Sanja Kojić³, Marko Radenković¹, Marko Radović^1
1BioSense Institute, University of Novi Sad, Novi Sad, Serbia, ²Institute for Nuclear Sciences “Vinca”, University of Belgrade, Belgrade, Serbia, ³Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia

P.S.16.
Tuning the structure and electrochemical properties of Nb₂CT_x MXene via silane functionalization
Ivan Pešić¹, Marko Spasenović¹, Nemanja Gavrilov², Vanja Vojnović¹, Anđela Gavran¹, Katarina Tošić¹, Marija V. Pergal^1
1University of Belgrade, Institute of Chemistry, Technology and Metallurgy, 11000 Belgrade, Serbia, ²University of Belgrade - Faculty of Physical Chemistry, 11000 Belgrade, Serbia

YUCOMAT SYMPOSIUM D: ECO-MATERIALS AND ECO-TECHNOLOGIES

P.S.17.
Evaluation of AgCl/TiO₂ heterostructures for visible-light-assisted low-density polyethylene microplastic degradation
Natalya Khan^1,2 , Aizhan Koishybekova^1
1Institute of Batteries, LLP, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan, ²Laboratory of Advanced Materials and Systems for Energy Storage, PI “National Laboratory Astana”, Nazarbayev University, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan

P.S.18.
Effect of various nickel modification techniques on the physicochemical properties of mesoporous silica SBA-15
Slobodanka Dragojević¹, Branko Kordić², Goran N. Kaluđerović^1
1Department of Engineering and Natural Sciences, University of Applied Sciences Merseburg, Eberhard-Leibnitz-Straße 2, 06217 Merseburg, Germany, ²Faculty of Science, University of Novi Sad, Dositej Obradović Square 3, 21000 Novi Sad, Serbia

P.S.19.
BioSunBlocker - Biodegradable alternative to conventional UV-blockers
Florian Dietrich, Goran N. Kaluđerović
Department of Engineering and Natural Sciences, University of Applied Sciences Merseburg, Eberhard-Leibnitz-Straße 2, 06217 Merseburg, Germany

P.S.20.
Large-sized magnetite nanoparticles with silica shells as UV reflective nanomaterials
Sanin Čengić¹, Zoran Marković², Goran N. Kaluđerović^1
1Department of Engineering and Natural Sciences, University of Applied Sciences Merseburg, Eberhard-Leibnitz-Straße 2, 06217 Merseburg, Germany, ²Department of Natural and Mathematical Sciences State University of Novi Pazar, 36300 Novi Pazar, Serbia

P.S.21.
Comparative adsorption-desorption study of magnetic buckwheat hull-Fe₃O₄ nanocomposite and NaOH-modified buckwheat hull for Pb(II), Cd(II) and Cr(III): kinetics, isotherms, and thermodynamics evaluation
Tayyab Tahir¹, Rūta Druteikienė¹, Zita Žukauskaitė¹, Rūta Barisevičiūtė¹, Jūratė Vaičiūnienė^2
1Department of Nuclear Research, Center for Physical Sciences and Technology Savanorių ave. 231, LT-02300 Vilnius, Lithuania, ²Department of Catalysis, Center for Physical Sciences and Technology Saulėtekio av. 3, LT-10257 Vilnius, Lithuania

P.S.22.
AgBr/g-C₃N₄ composites for solar-driven degradation of polystyrene microplastics
Irada Kazbekova, Natalya Khan
Institute of Batteries, LLP, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan

P.S.23.
AgX (X = Cl, Br, PO₄) photocatalysts for the degradation of polystyrene microplastics
Azhar Mukasheva, Natalya Khan
Institute of Batteries, LLP, Kabanbay Batyr Ave. 53, Astana, 010000, Kazakhstan

YUCOMAT SYMPOSIUM E: BIOMATERIALS

P.S.24.
Synthesis, characterization and biological activity of riboflavin-loaded Au/TiO₂ Janus micromotors
Radoš Stefanović¹, Radovan Dojčilović², Danijela Danilović², Jelena Pajović³, Vladimir Đoković², Tamara Đukić⁴, Vesna Ilić¹, Biljana Ristić^1
1Institute for Medical Research - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia, ²Center of Excellence for Photoconversion, Vinča Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia, ³University of Belgrade, Faculty of Physics, Belgrade Serbia, ⁴Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia

P.S.25.
Organotin(IV)-loaded SBA-15 nanomaterials as emerging platforms for potential anticancer applications
Slađana Kovačević¹, Sascha C. Schneeweiß¹, Zorica Leka², Goran N. Kaluđerović^1
1Department of Engineering and Natural Sciences, University of Applied Sciences Merseburg, 06217 Merseburg, Germany, Faculty of Technology, University of Montenegro, Podgorica, Montenegro

P.S.26.
Design and characterization of an oxaliplatin-based hybrid nanostructure bearing axially coordinated ibuprofen moieties
Sascha Corvin Schneeweiß, Paul Thomashausen, Goran N. Kaluđerović
Department of Engineering and Natural Sciences, University of Applied Sciences Merseburg, 06217 Merseburg, Germany

 

Wednesday, September 2, 2026

Second Poster Session, National Restaurant Jadranka Terrace

Session II: 08⁰⁰ - 09³⁰
Chairpersons: Joanna Kulasa, Martina Urbanova

SYMPOSIUM A: ADVANCED METHODS IN SYNTHESIS AND PROCESSING OF MATERIALS

P.S.27.
Structure and transport properties of ultra-thin high entropy perovskite films prepared by solution deposition technique
Ivan Stijepović¹, Marija Milanović¹, Jelena Vukmirović¹, Iva Toković¹, Danica Piper², Xuyun Guo³, Valeria Nicolosi³, Goran Stojanović⁴, Vladimir Srdić^1,5
1University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Serbia, ²University of Novi Sad, Biosense Institute, Novi Sad, Serbia, ³Trinity College Dublin, Dublin, Ireland, ⁴University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia, ⁵Serbia Academy for Sciences and Arts, Belgrade, Serbia

P.S.28.
From plastic waste to conductive additives: A sustainable carbon material for lithium-ion batteries
Kuanysh Kurtibay¹, Arailym Nurpeissova^1,2
1Institute of Batteries LLP, 53 Kabanbay Batyr Ave., Astana, Kazakhstan, ²Institute of New Materials and Energy Technologies, 53 Kabanbay Batyr Ave., Astana, Kazakhstan

P.S.29.
Programmable 3D carbon nanotube architectures enabled by catalyst-controlled growth dynamics
O. Tolga Gul
Physics Department, Polatlı Faculty of Science and Letters, Ankara Hacı Bayram Veli University, Ankara 06900, Türkiye

P.S.30.
Theoretical study on domino-type dehydration-cyclization reaction of alkynols based on quantum chemical calculations
Takeshi Yoshikawa, Takashi Okitsu, Manabu Hatano, Ken Sakata
Toho University, The University of Toyama, Kobe Pharmaceutical University

P.S.31.
Development of carbon composite materials with increased durability and functionality for the metallurgical industry
Joanna Kulasa¹, Anna Brudny¹, Barbara Juszczyk¹, Romuald Wycisk^2
1Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland, ²Carbo-Graf Sp. z o.o., Racibórz, Poland

YUCOMAT SYMPOSIUM B: ADVANCED MATERIALS FOR HIGH-TECHNOLOGY APPLICATION

P.S.32.
CITIUS: A table-top source for ultrafast XUV science and advanced materials research
Giovanni De Ninno (on behalf of the FERMI collaboration)
Elettra Sincrotrone Trieste, Trieste, Italy; University of Nova Gorica, Nova Gorica, Slovenia

P.S.33.
FERMI at Elettra: a coherent free-electron laser source for advanced ultrafast X-ray science and international user access
Giovanni De Ninno (on behalf of the FERMI collaboration)
Elettra Sincrotrone Trieste, Trieste, Italy; University of Nova Gorica, Nova Gorica, Slovenia

P.S.34.
Zeolite-based photocatalysts formed by plasma electrolytic oxidation on different substrates
Nenad Tadić¹, Kristina Mojsilović¹, Marko Dević¹, Ljiljana Damjanović-Vasilić², Srna Stojanović², Katarina Rondović², Rastko Vasilić^1
1University of Belgrade, Faculty of Physics, Studentski trg 12-16, 11000 Belgrade, Serbia, ²University of Belgrade, Faculty of Physical Chemistry, Studentski trg 12-16, 11000 Belgrade, Serbia

P.S.35.
Measurement system enabling simulation tailored to the characterization of the electro-thermal conversion phenomenon in various material groups, including nanocomposites and phase-change materials (PCMs)
Rafał Twaróg, Krzysztof Zbroja
AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland

P.S.36.
Effects of micro- and nano-SrTiO₃ fillers on the thermal stability and optical properties of LDPE composites
Biljana Pećanin¹, Slavica Maletić², Dragana Grujić^1,3, Branka Ružičić¹, Manja Kurečič⁴, Alen Erjavec⁴, Blanka Škipina^1
1University of Banja Luka, Faculty of Technology, Banja Luka, Bosnia and Herzegovina, ²University of Belgrade-Faculty of Physics, Belgrade, Serbia, ³Academy of Sciences and Arts of the Republic of Srpska, Banja Luka, Bosnia and Herzegovina, ⁴University of Maribor, Faculty of Mechanical Engineering, Maribor, Slovenia

P.S.37.
ALD-deposited platinum on low-dimensional materials: Probing support-dependent metal-support interactions
Iryna Danylo¹, Michaela Hlinková¹, Julien Bachmann², Martina Pitínová¹, Martin Veselý^1
1University of Chemistry and Technology, Prague, Czech Republic, ²Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany

P.S.38.
Development and optimization of feedstock materials intended for 3D metal printing process
Joanna Kulasa¹, Anna Brudny¹, Marcin Maleta¹, Barbara Juszczyk¹, Marcin Karpiński¹, Wojciech Burian², Paweł Płatek³, Mariusz Magier⁴, Damian Jarosz⁵, Jerzy Lachmajer^6, Michał Mazurkiewicz^6
1Łukasiewicz Research Network - Institute of Non-Ferrous Metals, Gliwice, Poland, ²Łukasiewicz Research Network - Institute of Aviation, Warsaw, Poland, ³Military University of Technology, Warsaw, Poland, ⁴Warsaw University of Technology, Warsaw, Poland, ⁵Zakłady Mechaniczne “Tarnów” S.A., Tarnow, Poland, ⁶Zakłady Chemiczne NITRO-CHEM S.A., Bydgoszcz, Poland

P.S.39.
The Influence of the phase transformations on the shape memory effect in nickel-free titanium alloys with b stabilizing elements
Magda Metskhvarishvili¹, Kakha Gorgadze^1,2, Levan Chkharishvili², Micheil Janikashvili², Nikoloz Vachadze³, Giorgi Giorganashvili⁴, Tamari Mikava^5
1Institute Talga of Georgian Technical University, 0186Tbilisi, Georgia, ²Georgian Technical University, 0171Tbilisi Georgia, ³Tbilisi State Medical University, 0186Tbilisi, Georgia, ⁴Ilia Vekua Sukhumi Institute of Phys. and Tech., 0186Tbilisi, Georgia, ⁵Iv. Javakhishvili Tbilisi State University, 0177Tbilisi, Georgia

P.S.40.
The influence of 3D printing parameters using the PBF-LB/M method and post-processing on the properties and microstructure of M350 maraging steel
Krzysztof Żaba, Maciej Balcerzak, Łukasz Kuczek, Ilona Różycka, Aleksandra Iwańczak
AGH University of Krakow, Faculty of Non-Ferrous Metals, Krakow, Poland

P.S.41.
Structure and mechanical properties of PBF-LB/M - fabricated AlSi7 alloy extruded by KOBO method
Paweł Ostachowski¹, Przemysław Snopiński², Krzysztof Żaba¹, Stanislav Rusz³, Aleksandra Iwańczak¹, Maciej Balcerzak¹, Marek Łagoda^4
1Faculty of Non-Ferrous Metals, AGH University of Krakow, A. Mickiewcza 30Av., 30-059 Cracow, Poland, ²Department of Engineering Materials and Biomaterials, Silesian University of Technology, 18A Konarskiego Street, 44-100 Gliwice, Poland, ³Faculty of Mechanical Engine­ering, VSB-TU Ostrava, 17. Listopadu 2172/15, 08 00 Ostrava, Czech Republic, ⁴Research Network Łukasiewicz - Institute of Non-Ferrous Metals, Sowińskiego St. 5, 44-100 Gliwice, Poland

P.S.42.
Nanomaterial-enabled electrochemical DNA biosensors: advances in signal enhancement and probe immobilization
Zoran Pavlovic, Ana Kupresanin
Biosense institute, Dr. Zorana Djindjica 1, 21000 Novi Sad, Serbia

P.S.43.
Mechanochemical synthesis and transport properties of calcium-substituted rare-earth aluminates
Martin Fabián¹, Blanca I. Arias-Serrano², Jaroslav Briančin¹, Hristo Kolev³, Aleksey Yaremchenko^2
1Institute of Geotechnics, Slovak academy of Sciences, Košice, Slovakia, ²CICECO - Aveiro Institute of Materials Department of Materials and Ceramic Engineering, University of Aveiro, Portugal, ³Institute of Catalysis, Bulgarian Academy of Sciences, Sofia, Bulgaria

P.S.44.
Ti₃AlC₂-enhanced polyaniline composites: Structure and electrochemical behavior
Jana Mišurović¹, Bojana Kuzmanović², Maša Šegrt¹, Milica Vujković^3,4
1University of Montenegro, Faculty of Technology, Cetinjski put bb, 81000 Podgorica, Montenegro, ²“Vinča” Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade, POB 522, 11000, Belgrade, Serbia, ³University of Belgrade - Faculty of Physical Chemistry, Studentski trg 12-16, 11158, Belgrade, Serbia, ⁴Center for Interdisciplinary and Multidisciplinary Studies, University of Montenegro, Podgorica, Montenegro

P.S.45.
Electrochemical behavior of Mxene for Na-ion batteries
Milica J. Vujković^1,2,3, Katarina Batalović⁴, Olivera Lužanin², Bojana Kuzmanović⁴, Robert Dominko^2
1University of Belgrade, Faculty of Physical Chemistry, Serbia, ²National Institute of Chemistry, Ljubljana, Slovenia, ³Center for Interdisciplinary and Multidisciplinary Studies, University of Montenegro, ⁴Laboratory for Nuclear and Plasma Physics, Centre of Excellence for Hydrogen and Renewable Energy, Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia

P.S.46.
Engineering porous regenerated cellulose separators via ionic liquid processing for electrochemical energy storage
Daniel M. Mijailović, Višnja Mićović, Mirjana Kostić, Petar S. Uskoković
University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120, Belgrade, Serbia

P.S.47.
Mn-doped NFPP for aqueous sodium-ion batteries
Aleksandra Gezović Miljanić¹, Jana Mišurović¹, Veselinka Grudić¹, Robert Dominko², Milica Vujković^3,4
1University of Montenegro, Faculty of Technology, Podgorica, Montenegro, ²National Institute of Chemistry, Ljubljana, Slovenia, ³University of Belgrade - Faculty of Physical Chemistry, Belgrade, Serbia, ⁴Center for Interdisciplinary and Multidisciplinary Studies, University of Montenegro, Podgorica, Montenegro

P.S.48.
Morphological and structural characterization of amorphous FeGaAlPCB ribbons
Borivoje M. Nedeljković¹, Jelena M. Orelj¹, Vladimir. B. Pavlović², Nebojša S. Mitrović^1
1Joint Laboratory for Advanced Materials of SASA, Section for Amorphous Systems, Faculty of Technical Sciences Čačak, University of Kragujevac, Serbia, ²Faculty of Agriculture: University of Belgrade, Serbia

P.S.49.
Process control and structural evolution in magnetron-sputtered FA-MA perovskite thin films
Iryna Galstian^1,4, Maciej Oskar Liedke², Sneha Babu^1,3, Ronny Engelhard¹, Vladimir Shilovskikh¹, Arindam Mallick¹, Zhiwei Hu², Eric Hirschmann², Andreas Wagner², Evgen Len^4,5, Boris Rivkin¹, and Yana Vaynzof^1,3
1Leibniz-Institute for Solid State and Materials Research Dresden, Germany, ²Helmholtz-Zentrum Dresden-Rossendorf, Institute of Radiation Physics, Dresden, Germany, ³Technical University of Dresden, Dresden, Germany, ⁴G. V. Kurdyumov Institute for Metal Physics, N.A.S. of Ukraine, Kyiv, Ukraine, ⁵State Research Institution ‘Kyiv Academic University’, Kyiv, Ukraine

P.S.50.
First-principles insights into the synthesis of ZnIn₂Se₄ semiconductors
Dmytro Sofronov¹, Yurii Kazarinov², Miroslav Batentschuk³, Anna Rogovtsova⁴, Yurii Hizhnyi⁵, Karyna Lamonova^5
1Institute for Single Crystals, NASU, Kharkiv, Ukraine, ²NSC Kharkiv Institute of Physics and Technology, NASU, Kharkiv, Ukraine, ³Institute of Materials for Electronics and Energy Technology (i-MEET), Friedrich-Alexander-UniversitätErlangen-Nürnberg, Erlangen, Germany
⁴Taras Shevchenko National University of Kyiv, 01601 Kyiv, Ukraine, ⁵O. O. Galkin Donetsk Institute for Physics and Engineering, NASU, Kyiv, Ukraine

YUCOMAT SYMPOSIUM C: NANOSTRUCTURED MATERIALS

P.S.51.
Structural evolution of acid activated metakaolin studied by multinuclear solid-state NMR
Martina Urbanova¹, Jiri Brus¹, Martin Keppert^2
1Department of Structural analysis, Institute of Macromolecular Chemistry, Czech Academy of Sciences, Czech Republic, ²Czech Technical University in Prague, Faculty of Civil Engineering, Department of Materials Engineering and Chemistry, Thákurova 7, 166 29 Praha 6, Czech Republic

P.S.52.
Synthesis of LiNi_0.5Mn_1.5O₄@ZIF-62 hybrid nano architectures for high-performance batteries
Iryna V. Matsukevich, Muhammad U. Iqbal, Jose J. Velazquez
FunGlass - Center for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, 91150 Trenčín, Slovakia

P.S.53.
Microarchitectured materials for portable biosensors
Gabriela-Alexandra Rotaru¹, Oana-Daciana Botta², Victor-Constantin Diculescu², Cristina Busuioc^1 
1National University of Science and Technology Politehnica Bucharest, 1-7 Polizu Street, Bucharest, Romania, RO-011061, ²National Institute of Materials Physics, 405A Atomistilor Street, Bucharest-Magurele, Ilfov, Romania, RO-077125

P.S.54.
Creation titanium-matrix composites by 3d printing using conic electron beam and cored wire
Oleksandr Stasiuk, Vasyl Nevmerzhytskyi, Dmytro Vedel, Denys Oryshych
G. V. Kurdyumov Institute for Metal Physics of the N.A.S. of Ukraine - Kyiv, Ukraine

P.S.55.
Phase diagram of a system based on iron oxide and rare earth elements for the development of functional materials
O. Chudinovych¹, S. Korichev¹, M. Zamula¹, O. Liubchenko^2
1Frantsevich Institute for Problems of Materials Science of the NAS of Ukraine, Omeliana Pritsaka str., 3, Kyiv-03142, Ukraine, ²Institute of Physics, Polish Academy of Sciences, Aleja Lotnikow 32/46, PL-02668 Warsaw, Poland

P.S.56.
Reflection spectra of composite materials in the infrared range
Anatolii Andrushchak¹, Yaroslav Shchur^1,2, Andriy Danylov¹, Volodymyr Adamiv^1,3, Ihor Teslyuk³, Vasyl Hreb^1
1Lviv Polytechnic National University, Lviv, Ukraine, ²I.R. Yukhnovsky Institute of Condensed Matter Physics, NAS of Ukraine, Lviv, Ukraine, ³Vlokh Institute of Physical Optics, Ivan Franko Lviv National University, Lviv, Ukraine

 

Thursday, September 3, 2026

Third Poster Session, National Restaurant Jadranka Terrace

Session III:  08⁰⁰ - 09³⁰
Chairpersons: Milica Vujković, Jana Mišurović

SYMPOSIUM C: NANOSTRUCTURED MATERIALS

P.S.57.
Exploring the potential of spinel ferrites for soil moisture sensing applications
Marija Milanović¹, Ivan Stijepović¹, Milica Kisić², Mirjana Šiljegović^3
1University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Serbia, ²University of Novi Sad, Faculty of Technical Sciences, Novi Sad, Serbia, ³University of Novi Sad, Faculty of Sciences, Department of Physics, Novi Sad, Serbia

P.S.58.
Visible-light-assisted reduction of carbon dioxide catalyzed by ordered and disordered ceria-zirconia-based structures
Igor Djerdj¹, Stjepan Šarić¹, Dalibor Tatar¹, Habib Ullah², Ákos Kukovecz³, András Sápi^3
1Department of Chemistry, Josip Juraj Strossmayer University of Osijek, Cara Hadrijana 8/A, HR-31000 Osijek, Croatia, ²Centre for Advanced Material and Energy Sciences, Universiti Brunei Darussalam, Jalan Tungku Link, Gadong BE1410, Brunei Darussalam, ³Department of Applied and Environmental Chemistry, University of Szeged, HU-6720 Szeged, Hungary

P.S.59.
High-coercivity iron oxide nanostructures for next-generation rare-earth-free permanent magnets
Marin Tadić¹, Marko Đosić¹, Bosa Drakul¹, Ana Mraković¹, Ljubica Anđelković², Marija Šuljagić², Matjaž Panjan^3
1Condensed Matter Physics Laboratory, Vinca Institute of Nuclear Sciences - National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia, ²University of Belgrade-Institute of Chemistry, Technology and Metallurgy, Department of Chemistry, Njegoševa 12, Belgrade, Serbia, ³Jožef Stefan Institute, Jamova ulica 39, 1000 Ljubljana, Slovenia

P.S.60.
Ni-based coordination polymer material with remarkable energy storage features
Ariel Guzmán-Vargas, Marco A. López-M, María de J. Martínez-O
Instituto Politécnico Nacional, Escuela Superior de Ingeniería Química e Industrias Extractivas, SEPI-DIQI. UPALM 07738, CDMX, Mexico

P.S.61.
Highly crystalline iron oxide nanoparticles of various shapes: Bulk-like magnetization and MRI applications
Ana Mraković¹, Jelena Lazović², Bosa Drakul¹, Marko Djošić¹, Marin Tadić^1
1Condensed Matter Physics Laboratory, Vinča Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade, Belgrade, 11001, Serbia, ²Physical Intelligence Department, Max Planck Institute for Intelligent SystemsThe institution will open in a new tab, Stuttgart, Germany

P.S.62. 
Appearance of quantum resonant optical absorption in the IR region in ultrathin molecular crystal films
Dragana Rodić¹, Igor Mandić², Jovan Šetrajčić^3
1Laza Kostić High School, Novi Sad, Vojvodina, Serbia, ²University of Novi Sad, Faculty of Sciences, Novi Sad, Vojvodina, Serbia, ³Academy of Sciences and Arts of the Republic of Srpska, Banja Luka, B&H

YUCOMAT SYMPOSIUM D: ECO-MATERIALS AND ECO-TECHNOLOGIES

P.S.63. 
Nitrogen-doped starch-based carbons for adsorption application
Nataša Palić¹, Marina Maletić¹, Ana Kalijadis², Ivan Bracanović², Ivona Janković Častvan³, Katarina Trivunac³, Marija Vukčević^3
1Innovation Center of Faculty of Technology and Metallurgy, Belgrade, Serbia, ²Vinča Institute of Nuclear Sciences, University of Belgrade, National Institute of the Republic of Serbia, Belgrade, Serbia, ³Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia

P.S.64.
Remediation of water polluted by pesticides and antibiotics from medical waste using biochar from corn, tobacco and tomato
Emilija Vukićević¹, Jelena Isailović², Polonca Trebše³, Vesna Antić⁴, Jan Schwarzbauer⁵, Gordana Gajica⁶ , Branimir Jovančićević^1
1University of Belgrade, Faculty of Chemistry, Belgrade, Serbia; ²Mining Institute, Belgrade, Serbia; ³Faculty of Health Sciences, University of Ljubljana, Ljubljana, Slovenia; ⁴University of Belgrade, Faculty od Agriculture, Belgrade, Serbia; ⁵RWTH University, Organic Biochemistry in Geo-Systems, Aachen, Germany; ⁶University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Belgrade, Serbia

P.S.65.
Following the Traces of Tesla's Creativity: From Tesla's Resonant Coil to Bioresonant Integrative Medicine
Dejan Raković
University of Belgrade, Faculty of Electrical Engineering, Serbia

P.S.66.
Polycarboxyl acids-driven donor-acceptor engineering of g-C₃N₄ toward efficient photocatalytic reduction of Cr(VI)
Sofija Petković¹, Jana Petrović¹, Đorđe Janaćković², Rada Petrović^2
1Innovation Centre of Faculty of Technology and Metallurgy, Ltd, Belgrade, Serbia, ²University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia

P.S.67.
Reinforced secondary-sourced cellulose-based composites: structure, performance and environmental fate
Nemanja Barać¹, Vukašin Ugrinović¹, Sofija Petković¹, Katarina Dimić-Mišić², Đorđe Janaćković^1,3, Patrick Gane^3,4
1University of Belgrade, Innovation Center of the Faculty of Technology and Metallurgy, 11000 Belgrade, Serbia, ²University of Belgrade, Faculty of Technology and Metallurgy, 11000 Belgrade, Serbia, ³Environmental, Social and Governance, Gestamp Automoción S.A., Torre Ombú nº3, 28045 Madrid, Spain, ⁴Aalto University, School of Chemical Engineering Department of Bioproducts and Biosystems, 00076 Aalto, Helsinki, Finland

P.S.68.
Sunflower protein isolate as a functional component in Poly(vinyl alcohol) composite films: Structure-property relationships
Ksenija Stajić Trošić¹, Milica Marčeta Kaninski¹, Srđan Perišić², Aleksandar Grujić³, Vesna Radojević⁴, Vukašin Ugrinović^2
1Institute of General and Physical Chemistry, Studentski trg, Belgrade, Serbia, ²Innovation Center of Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, Belgrade, Serbia, ³Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, Belgrade, Serbia, ⁴Faculty of Technology and Metallurgy, University of Belgrade, Serbia

P.S.69.
Tailoring high-performance bioplastic films from sunflower protein and PVA: Synergistic effects of composition and thermal processing
Nadja Urošević¹, Vukašin Ugrinović², Srđan Perišić², Ksenija Stajić Trošić³, Aleksandar Grujić^1
1Institute of Chemistry, Technology and Metallurgy, National Institute of the Republic of Serbia, University of Belgrade, Njegoseva 12, Belgrade, Serbia, ²Innovation Center of the Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, Belgrade, Serbia, ³Institute of General and Physical Chemistry, National Institute of the Republic of Serbia, Studentski Trg 12, Belgrade, Serbia

P.S.70.
Highly-active zinc-oxide as an antibacterial feed additive
Aleksandar Janaćković¹, Stevan Blagojević¹, Sanja Jevtić^2
1Institute of General and Physical Chemistry, Belgrade, Serbia, ²Faculty of Technology and Metallurgy, University of Belgrade, Serbia

P.S.71.
Upcycling polypropylene waste into carbon anode materials for lithium-ion batteries
Yryszhan Tashenova¹, Arailym Nurpeissova^1,2
1Institute of Batteries LLP, 53 Kabanbay Batyr Ave., Astana, Kazakhstan, ²Institute of New Materials and Energy Technologies, 53 Kabanbay Batyr Ave., Astana, Kazakhstan

P.S.72.
Persulfate-assisted heterogeneous photocatalytic degradation of organic pollutants - investigation of the interaction between ZnO, PS, H₂O₂ and UV light
Bence Veres, Tünde Alapi
Department of Molecular and Analytical Chemistry, University of Szeged, H-6720 Szeged, Dóm tér 7, Hungary

YUCOMAT SYMPOSIUM E: BIOMATERIALS

P.S.73.
Evaluation of adhesive properties and biological performance of 3D printed gelatin-polyvinylpyrrolidone scaffolds for drug release
Marija N. Jovanović¹, Ivana M. Stajčić², Miloš M. Petrović¹, Dušica B. Stojanović¹, Anđela N. Radisavljević³, Svetlana R. Ibrić⁴, Vesna Radojević¹, Petar S. Uskoković^1
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, ²University of Belgrade “Vinča” Institute of Nuclear Sciences - National Institute of the Republic of Serbia, Department of Physical Chemistry, Belgrade, Serbia, ³University of Belgrade, Innovation Centre, Faculty of Technology and Metallurgy, Belgrade, Serbia, ⁴University of Belgrade - Faculty of Pharmacy, Department of Pharmaceutical Technology and Cosmetology, Belgrade, Serbia

P.S.74.
Choline-functionalized polymeric nanoparticles for targeted cancer therapy via transporter blockade and metabolic disruption
Han Chang Kang, Naehak Park
College of Pharmacy, The Catholic University of Korea, Bucheon, Republic of Korea

P.S.75.
The scaling theory approach to nano-particles transfer relations to cells and inside a living cell
Milanka M. Plavšić^1,2, Milenko B. Plavšić^3,4
1The Academy of Applied Studies- Polytechnic, ²University of Niš, ³University of Belgrade, ⁴Engineering Sciences Academy of Serbia

P.S.76.
Electron beam irradiation of starch-gelatin and composite hydrogels for cartilage and bone repair
Vukašin Ugrinović¹, Tamara Matić², Đorđe Veljović², Uliana Pinaeva^3
1Innovation Center of Faculty of Technology and Metallurgy, Belgrade, Serbia, ²Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia, ³Flerov Laboratory of Nuclear Reactions, Joint Institute for Nuclear Research, Dubna, Russia

P.S.77.
Highly porous poly(methacrylic acid)/gelatin hydrogels reinforced with hydroxy­apatite and bioactive glass as multifunctional scaffolds for bone regeneration
Vukašin Ugrinović¹, Tamara Matić², Rada Petrović², Đorđe Janaćković², Đorđe Veljović^2
1Innovation Center of Faculty of Technology and Metallurgy, Belgrade, Serbia, ²Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia

P.S.78.
Optically active CeO₂/(Ag, Pt and Pd) nanocomposites for inactivation of IAV virus
Olena Lavrynenko^1,2, Maksym Zahornyi¹, Olexander Kolomys³, Andrey Ragulya^1,2, Svіtlana Zahorodnia^4
1Frantsevich Institute for Problems of Materials Science NASU, Kyiv, Ukraine, ²Nanotechcenter LLC, Kyiv, Ukraine, ³Lashkaryov Institute of Semiconductor Physics NASU, Kyiv, Ukraine, ⁴D. Zabolotny Institute of Microbiology and Virology NASU, Kyiv, Ukraine

P.S.79.
Electron irradiation as a tool for engineering electrophysical properties of carbon nanotubes
Halyna Mykhailova¹, Evgen Len^1,2, Vladimir Neymash³, Mykola Skoryk^1
1G. V. Kurdyumov Institute for Metal Physics N.A.S. of Ukraine, 36 Academician Vernadsky Blvd., 03142 Kyiv, Ukraine, ²Kyiv Academic University, N.A.S. and M.E.S. of Ukraine, 36 Acad. Vernadsky Blvd., 03142 Kyiv, Ukraine, ³Institute of Physics of N.A.S. of Ukraine, avenu Nauki 46, 03028 Kyiv, Ukraine

P.S.80.
New quantum material based on few-layer graphene modified with alkali-metal-oxygen complexes
E.G. Len^1,2, M.O. Varvarin^1,2, V.S. Lebed^1,2, О.М. Lisova^1,3, O.D. Feia^1,2, O.A. Kordyuk^1,2
1G.V. Kurdyumov Institute for Metal Physics, NAS of Ukraine,36 Academician Vernadsky Blvd., 03142 Kyiv, Ukraine, ²Kyiv Academic University, NAS and MES of Ukraine, 36 Academician Vernadsky Blvd., 03142 Kyiv, Ukraine, ³Chuiko Institute of Surface Chemistry, NAS of Ukraine,  17 General Naumov Str., 03164 Kyiv, Ukraine

P.S.81.
Structure and properties of magnetic substances obtained by ferritization of iron-containing waste
Gennadii Kochetov, Dmytro Samchenko, Oles Lastivka
Kyiv National University of Construction and Architecture, Ukraine

P.S.82.
Adsorption of phenol from water using green tea (Camellia sinensis L.) leaf waste
Ntaote David Shooto, Patience Mapule Thabede
Material Science Lab, Natural Science Department, Vaal University of Technology Private Bag X021, Vanderbijlpark 1900, South Africa

P.S.83.
The removal of methyl orange from water using biochar derived from a blend of carrot and potato peels
Patience Mapule Thabede, Ntaote David Shooto
Water Treatment Laboratories, Natural Science Department, Vaal University of Technology, Private Bag X021, Vanderbijlpark 1900, South Africa

P.S.84.
Structural self-assembly of curcumin/myramistin complexes: H- and J-type aggregation
Olga Kazakova, Natalia Lipkovska, Valentyna Barvinchenko
Chuiko Institute of Surface Chemistry, NAS of Ukraine, Kyiv 03164, Ukraine