YUCOMAT 2022 & XII WRTCS - Scientific Programme
Virtual Lectures and Presentations are HERE
Book of Abstracts
Sunday, August 28, 2022
Monday, August 29, 2022
Morning
Afternoon
Tuesday, August 30, 2022
Morning
Afternoon
Wednesday, August 31, 2022
Morning
Thursday, September 1, 2022
Morning
National Restaurant Jadranka Terrace
Third YUCOMAT Poster Session
Session I: 08.30-09.45
Chairpersons: Željko Radovanović, Jelena Vujančević
YUCOMAT SYMPOSIUM C:
NANOSTRUCTURED MATERIALS
P.S.III.C.12. Electrochemical properties of composites of graphene oxide and cobalt ferrite doped with zink and gallium
Marija Grujičić1, Željko Mravik1, Danica Bajuk-Bogdanović2, Damjan Vengust3, Zoran Jovanović1, Ivana Stojković Simatović2, Sonja Jovanović1
1Laboratory of Physics,Vinca Institute of Nuclear Sciences-National Institute of the Republic of Serbia, University of Belgrade, Belgrade, Serbia, 2Faculty of Physical Chemistry, University of Belgrade, Belgrade, Serbia, 3Advanced Materials Department, Jožef Stefan Institute, Ljubljana, Slovenia
P.S.III.C.13. Electrochemical charge storage properties of thermally treated and ion-beam irradiated graphene oxide/12-tungstophosphoric acid nanocomposites
Željko Mravik1, Marko Gloginjić1, Jelena Rmuš1, Milica Pejčić1, Danica Bajuk-Bogdanović2, Maria Vesna Nikolić3, Nemanja Gavrilov2, Zoran Jovanović1
1Center of Excellence for Hydrogen and Renewable Energy (CONVINCE), Laboratory of Physics, Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia, 2Faculty of Physical Chemistry, University of Belgrade, P.O. Box 47, 11158, Belgrade, Serbia, 3Institute for Multidisciplinary Research, University of Belgrade, 1 Kneza Višeslava, 11000 Belgrade, Serbia
P.S.III.C.14. Mechanochemical synthesis of MgH2-V nanocomposistes
Z. Sekulić1, I. MIilanović2, B. Babić2, M. Prvulović2, J. Grbović Novaković2, V. Asanović3
1Ministry of Capital Investments, The Government of Montenegro, Directorate for Energy and Energy Efficiency, Rimski trg 46, 81 000 Podgorica, Montenegro,
2Vinča Institute of Nuclear Sciences, National Institute of Republic of Serbia, Centre of Excellence for Renewable and Hydrogen Energy, University of Belgrade, POB 522, 11000 Belgrade, Serbia, 3 Faculty of Metallurgy and Technology, University of Montenegro, Cetinjski put 2, 81000 Podgorica, Montenegro
P.S.III.C.15. Structural, optical and mechanical characterization of the PMMA- ZrO2 nanocomposites
Ivan Pešić1, Miloš Petrović1, Dragana Pejić1, Maja S. Rabasović2, Dragutin Šević2, Vesna Radojević1
1University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia, 2Institute of Physics Belgrade, University of Belgrade, Pregrevica 118 Zemun, Belgrade, Serbia
YUCOMAT SYMPOSIUM D:
ECO-MATERIALS AND ECO-TECHNOLOGIES
P.S.III.D.1. Synthesis and characterization of thermally treated geopolymer composite materials
Miljana Mirković1, Mira Vukčević2, Ivana Bošković2, Snežana Nenadović1, Ljiljana Kljajević1, Dunja Đukić3, Vladimir Pavlović4
1Department of Materials, „VINČA" Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade, Belgrade, Serbia, 2University of Montenegro, Faculty of Metallurgy and Technology, Cetinjski put bb, 81000 Podgorica, Montenegro, 3University of Belgrade, Faculty of Biology, Studentski trg 16, 11000 Belgrade, Serbia, 4University of Belgrade, Faculty of Agriculture, Nemanjina 6, 11080 Belgrade, Serbia
P.S.III.D.2. Photocatalytic activity of N-TiO2 nanotubes decorated with CdS QD
Jelena Vujančević1, Andjelika Bjelajac2, Endre Horváth3, László Forró3, Vladimir B. Pavlović4, Djordje Janaćković5
1Institute of Technical Sciences of SASA, Belgrade, Serbia, 2Innovation Center of Faculty of Technology and Metallurgy, Ltd, Belgrade, Serbia, 3Ecole Polytechnique Fédérale de Lausanne, Laboratory of Physics of Complex Matter, Lausanne, Switzerland, 4University of Belgrade, Faculty of Agriculture, Belgarde-Zemun, Serbia, 5University of Belgarde, Faculty of Technology and Metallurugy, Belgrade, Serbia
P.S.III.D.3. Study of oil type pollutant adsorption on Vrbas river sediments (Bosnia and Herzegovina)
Sanja Pržulj1, Gorica Veselinović2, Marko Ivanišević1, Slobodan Gnjato1, Milica Balaban1, Branimir Jovančićević3
1Faculty of Natural Sciences and Mathematics, University of Banja Luka, Mladena Stojanovića 2, 78000 Banja Luka, Bosnia and Herzegovina; 2Center of Chemistry, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11001 Belgrade, Serbia; 3University of Belgrade, Faculty of Chemistry, Studentski trg 12-16. 11001 Belgrade, Serbia
P.S.III.D.4. Evaluation of photocatalytic activity of Sr0.9La0.1TiO3 and Sr0.25Ca0.25Na0.25Pr0.25TiO3 nano-sized ceramic powders for water treatment
Nikola Kanas1, Aleksandra Jovanoski2, Vladimir Rajić3, Annu Sharma4, Subramshu S. Bhattacharya4, Stevan Armaković5,6, Maria Savanović2,6, Sanja J. Armaković2,6
1Institute BioSense, University of Novi Sad, Serbia, 2University of Novi Sad, Faculty of Sciences, Department of Chemistry, Biochemistry and Environmental Protection, 21000 Novi Sad, Serbia, 3INS Vinča, Department of Atomic Physics, University of Belgrade, Serbia, 4Nanofunctional Materials Technology Centre, Department of MME, IIT Madras, India, 5University of Novi Sad, Faculty of Sciences, Department of Physics, 21000 Novi Sad, Serbia, 6Association for the International Development of Academic and Scientific Collaboration (AIDASCO), 21000 Novi Sad, Serbia
P.S.III.D.5. Performance of ternary cement binders containing high volume of fly ash and fluid catalytic cracking catalyst residue
Jelena Rakić1, Zvezdana Baščarević1, Rada Petrović2
1Institute for Multidisciplinary Research, University of Belgrade, Serbia,2Faculty of Technology and Metallurgy, University of Belgrade, Serbia
P.S.III.D.6. Comparative assessment of chemically and ‘green’ synthesized magnetic nanoparticles and their use for removal of pollutants
Natalia Kobylinska1, Dmytro Klymchuk2, Anatolij Shakhovsky3, Yakiv Ratushnyak3, Volodymyr Duplij3, Nadiia Matvieieva3
1A.V. Dumansky institute of colloidal chemistry and water chemistry NAS of Ukraine, 2Institute of Botany NAS of Ukraine, Kyiv, Ukraine, 3Institute of Cell Biology and Genetic Engineering NAS of Ukraine, Kyiv, Ukraine
P.S.III.D.7. Environmentally friendly hybrid poly(methyl methacrylate)-wood-poly(ethylene terephthalate)-alumina composite material
Anđela N. Radisavljević1, Marija Vuksanović2, Aleksandar Grujić3, Srđan Perišić1, Vesna Radojević4
1University of Belgrade, Innovation Centre, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia, 2University of Belgrade, Department of Chemical Dynamics and Permanent Education, „VINČA“ Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, Mike Petrovića Alasa 12-14, 11351 Belgrade, Serbia, 3University of Belgrade, Institute of Chemistry, Technology and Metallurgy, Njegoševa 12, Belgrade, Serbia, 4University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia
P.S.III.D.8. Initial characterization and evaluation of two tailing dumps in Bulgaria for application as precursors for geopolumers
Darya Ilieva, Lyudmila Angelova, Temenuzhka Radoikova, Andriana Surleva
University fo Chemical technology and Metallurgy, 8 „St. Kl. Ohridski” blvd., 1756 Sofia, Bulgaria
YUCOMAT SYMPOSIUM E:
BIOMATERIALS
P.S.III.E.1. Synthesis, characterization and DFT calculations of Schiff base Co(III) complexes
Milica Savić1, Mima Jevtović2, Matija Zlatar3, Maja Gruden1, Dragana Mitić2, Božidar Čobeljić1, Katarina Anđelković1
1Faculty of Chemistry, University of Belgrade, Studentski trg 12-16, 11000 Belgrade, Serbia; 2Innovative centre-Faculty of Chemistry, University of Belgrade, Studentski trg 12-16, 11000 Belgrade, Serbia; University of Belgrade-3Institute of Chemistry, Technology and Metallurgy, Department of Chemistry, Njegoševa 12, 11000 Belgrade, Serbia
P.S.E.2. Osteogenic potential of diluted blood and boone marrow in ectopic osteogenesis
Marija Vukelić-Nikolić,1 Stevo Najman,1 Jelena Živković,1 Jelena Najdanović,1 Sanja Stojanović,1 Vladimir Cvetković,2 Perica Vasiljević2
1Institute of Biology and Human Genetics, Faculty of Medicine, University of Niš, Serbia, 2Department of Biology and Ecology, Faculty of Science and Mathematics, University of Niš, Serbia
P.S.III.E.3. Novel antimicrobial composites based on calcium- and zinc-alginate hydrogels and activated charcoal
Andrea Osmokrović1, Ivan Jančić2, Ivona Janković- Častvan1, Predrag Petrović3, Marina Milenković2, Bojana Obradović1
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 2University of Belgrade, Faculty of Pharmacy, Belgrade, Serbia, 3Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia
P.S.III.E.4. Characterization and drug release of Zn-Al layered double hydroxyde‒nifuroxazide composite
Željko Radovanović1, Lidija Radovanović1, Đorđe Janaćković2, Rada Petrović2
1Innovation Centre of the Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia, 2University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia
P.S.III.E.5. Bio-mimetic bone-like surface structure of Ti-based implants
Yevheniia Husak1,2, Pal Terek3, Sanja Kojić3, Zoran Bobić3, Bojan Petrović4, Sergiy Kyrylenko1, Maksym Pogorielov1,5, Wojciech Simka2
1Sumy State University, 40007 Sumy, Ukraine, 2Silesian University of Technology, 44-100 Gliwice, Poland, 3Faculty of Technical Sciences, University of Novi Sad, Novi Sad, Serbia, 4Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia, 5University of Latvia, Institute of Atomic Physics and Spectroscopy, LV-1004 Riga, Latvia
P.S.III.E.6. 3D printed scaffold with bisphosphonate for tissue regeneration
Marija N. Jovanović1, Miloš M. Petrović1, Anđela N. Radisavljević2, Dušica B. Stojanović1, Vesna J. Radojević1, Svetlana R. Ibrić3, Petar S. Uskoković1
1University of Belgrade - Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia, 2University of Belgrade, Innovation Centre, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia, 3 University of Belgrade - Faculty of Pharmacy, Department of Pharmaceutical Technology and Cosmetology, Vojvode Stepe 450, 11221 Belgrade, Serbia
P.S.III.E.7. Processing and characterization of hybrid chitosan (Ch)/polylactic acid (PLA) composite nanofibrous scaffolds for biomedical application
Viktoriia Korniienko1, Yevhen Samokhin1, Julia Varava1, Kateryna Diedkova1, Bojan Petrović2, Maksym Pogorielov1,3
1Biomedical Research Center, Sumy State University, R.-Korsakova, 2, 40007, Sumy, Ukraine, 2Faculty of Medicine, University of Novi Sad, Novi Sad, Serbia, 3Institute of Atomic Physics and Spectroscopy, University of Latvia, Jelgavas iela 3, Riga, LV-1004, Latvia
P.S.III.E.8. Nanostructured surface modification and characterization of titanium based materials for medical application
Dragana R. Barjaktarević, Marko P. Rakin, Djordje N. Veljović, Bojan I. Medjo, Veljko R. Djokić
University of Belgrade, Faculty of Technology and Metallurgy, 11120 Belgrade, Serbia
P.S.III.E.9. Electrospun poly(ε-caprolactone) nanofiber mats with cefazolin or yarrow extract powder as urinary catheter-coating materials
Anđela N. Radisavljević1, Marija Jovanović2, Dušica Stojanović2, Miloš Petrović2, Vesna Radojević2, Petar Uskoković2, Mirjana Rajilić-Stojanović2
1University of Belgrade, Innovation Centre, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia, 2University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120 Belgrade, Serbia
P.S.III.E.10. The effect of liposomal pro-healing protein on the rheological properties of mucoadhesive injectable hydrogel
Veronika Sevriugina1, Zuzana Kadlecová1, Lucy Vojtová1
1Central European Research Institute, Brno University of Technology
P.S.III.E.11. Encapsulation of bioactive proteins into thermosensitive biodegradable copolymer nanoparticles based on PLGA-PEG-PLGA
Klára Lysáková1, Monika Obršlíková2, Zuzana Kadlecová1, Lucy Vojtová1
1Brno University of Technology, CEITEC-Central European Institute of Technology, Advanced Biomaterials, Purkyňova 656/123, 612 00 Brno, Czech Republic, 2Brno University of Technology, Faculty of Chemistry, Purkyňova 464, 612 00 Brno, Czech Republic
P.S.III.E.12. Composite hydrogels based on gelatin, hydroxypropyl methylcellulose and Mg-doped biphasic calcium phosphate for biomedical applications
Vukasin Ugrinović1, Veroniki Hristara2, Maja Marković1, Predrag Petrović2, Rada Petrović2, Đorđe Janaćković2, Đorđe Veljović2
1Innovation Center of Faculty of Technology and Metallurgy, Belgrade, Serbia, 2Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia
P.S.III.E.13. Antibiofilm activity of the bioactive ceramic coatings on the 3D printed TC4 scaffold
Marija Milivojević1, Milena Radunović2, Marija Stevanović1, Željko Radovanović1, Rada Petrović3, Đorđe Janaćković3
1Innovation Center of Faculty of Technology and Metallurgy, 2School of Dental Medicine, University of Belgrade, 3Faculty of Technology and Metallurgy, University of Belgrade
P.S.III.E.14. Multicomponent hemostatic dressing may improve bleeding stop and wound regeneration
Katarína Kacvinská1, Marian Sedlář1, Radim Dvořák2, Tomáš Sopuch3, Lucy Vojtová1
1Central Eruopean Institute of Technology, Brno Univ. Technol., Brno, CZ; 2Hemcon Medical Technologies CZ s.r.o., Tišnov, CZ; 3Holzbecher, spol. s.r.o barevna a bělidlo Zlíč, Česká Skalice-Zlíč, CZ
P.S.III.E.15. Quantum-informational macrophenomena in biomedicine & holistic psychosomatics: quantum-holographic framework
D. I. Raković
Faculty of Electrical Engineering, University of Belgrade, Serbia
P.S.III.E.16. Chitosan/tripolyphosphate capsule-forming gelation monitored via light scattering curves: determination of particle forming phases and their effect on physico-chemical and biological parameters
Jana Dorazilova1, Lucy Vojtova1, Kaja Kasemets2
1Central European Institute of Technology of Brno University of Technology, Research Group of Advanced Biomaterials, Brno, Czech Republic, 2National Institute of Chemical Physics and Biophysics, Laboratory of Environmental Toxicology, Estonia
WRTCS Poster Session
W.P.S.F.1. Biodegradable coatings improved mechanical properties and bioactivity of sintered calcium phosphate scaffolds
Đorđe Veljović1, Vukašin Ugrinović2, Tamara Matić2, Julijana Tadić3, Olivera Dragutinović1, Teodora Jakovljević1, Jelena Stanisavljević1
1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 2Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia, 3University of Belgrade, Vinča Institute of Nuclear Sciences, Belgrade, Serbia
W.P.S.F.2. Composite scaffolds based on magnesium doped hydroxyapatite and mesoporous nanosized bioactive glass
Tamara Matić1, Zvezdana Baščarević2, Djordje Janaćković3, Djordje Veljović3
1Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia , 2University of Belgrade, Institute for multidisciplinary research, Belgrade, Serbia, 3University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
W.P.S.F.3. Sinterability study of the zeolite-based porous ceramics for water filter application
Ivan Stijepović, Marija Milanović, Jelena Vukmirović, Andrea Nesterović, Danica Piper, Vladimir V. Srdić
University of Novi Sad, Faculty of Technology Novi Sad, Department of Materials Engineering, Bulevar cara Lazara 1, 21000 Novi Sad, Serbia
W.P.S.F.4. Influence of aluminium anodizing wastes on Flash sintering of alumina
I. S. Vilarinho, R. Pinho, M. P. Seabra, P. M. Vilarinho, A. M. R. Senos
CICECO – Aveiro Institute of Materials, Department of Materials and Ceramic Engineering, University of Aveiro, Campus Universitário de Santiago, 3810-193 Aveiro, Portugal
Main Conference Hall
Second WRTCS Plenary Session
Session II: 10.00-12.45
Chairpersons: Biljana Stojanović, Boris Feigelson
10.00-10.30 W.PL.S.II.1.
Boris N. Feigelson, James A. Wollmershauser, Kevin P Anderson, Benjamin L Greenberg, Alan G Jacobs
U.S. Naval Research Laboratory, 4555 Overlook Ave., SW, Washington, DC 20375, USA
From nanoparticles to nanocrystalline solids with designed functionalities
10.30-11.00 W.PL.S.II.2.
Ricardo Serrazina1, Luis Pereira2, Paula M. Vilarinho1, Ana Senos1
1Department of Materials and Ceramic Engineering, CICECO-Aveiro Materials Institute, University of Aveiro, 3810-193 Campus Santiago, Portugal, 2CENIMAT-I3N, School of Science and Technology, FCT-NOVA, Universidade NOVA de Lisboa, Campus da Caparica. 2829-516 Caparica, Portugal
Studies on the flash sintering of KNN: flash variables, mechanisms and material’s properties
11.00-11.30 W.PL.S.II.3.
Karel Maca, Tomáš Spusta, Katarína Drdlíková, Martin Trunec, Daniel Drdlík, Róbert Klement
Brno University of Technology, Brno, Czech Republic, Funglass Centre of Excellence, Trenčín, SlovakiaCapsule free hot isostatic pressing as a way towards transparent structural and functional ceramics
11.30-12.00 Break
12.00-12.15 W.PL.S.II.4.
Elisa Torresani1, Maricruz Carrillo1,2, Eugene Olevsky1,2, Chris Haines3, Darold Martin4
1San Diego State University, San Diego, CA, USA, 2University of California San Diego, CA, USA, 3US Army DEVCOM - Army Research Laboratory, Aberdeen Proving Ground, MD, USA, 4US Army DEVCOM-Armaments Center, Picatinny Arsenal, NJ, USA
Additive manufacturing and spark plasma sintering: fabrication of powder components with cooling channels
12.15-12.30 W.PL.S.II.5. Virtual Presentation
Masaaki Aoki1,2, Ryousuke Aoki1, Akihiro Mochizuki2, Yoshio Murakami2, Mutsuharu Tsunoda2, Goro Yoshinari2, Maurizio Fenech3, Nobuhiko Nakano1
1Department of Electronics and Electrical Engineering, Faculty of Science and Technology, Keio University, Yokohama, Kanagawa 223-8521, Japan, 2MacDermid Alpha Electronics Solutions/ MacDermid Performance Solutions Japan, 3MacDermid Alpha Electronics Solutions / Alpha Assembly Solutions Germany GmbH
Thermal stress and deformation in SIC power chip system having Ag sintered bonding layers for advanced power conversion
Watch the lecture (®Copyright by Aoki et al.)
12.30-12.45 W.PL.S.II.6. Virtual Presentation
Kazuma Yamashita1, Masaaki Aoki1/ 2, Goro Yoshinari2, and Nobuhiko Nakano1
1 Department of Electronics and Electrical Engineering, Faculty of Science and Technology, MKeio University, Yokohama, Kanagawa 223-8521, Japan, 2 MacDermid Alpha Electronics Solutions / MacDermid Performance Solutions Japan, Hiratsuka, Kanagawa 254-0082, Japan
1Department of Electronics and Electrical Engineering, Faculty of Science and Technology, Keio University, Yokohama, Kanagawa 223-8521, Japan, 2MacDermid Alpha Electronics Solutions/ MacDermid Performance Solutions Japan, 3MacDermid Alpha Electronics Solutions / Alpha Assembly Solutions Germany GmbH
Excellent heat dissipation performance of power device structures having Ag sintered bonding layers
Watch the lecture (®Copyright by Aoki et al.)
14.00-19.00
Boat-trip around Boka Kotorska Bay