YUCOMAT 2022 & XII WRTCS - Scientific Programme


Virtual Lectures and Presentations are HERE
Book of Abstracts
 

Sunday, August 28, 2022

 

Monday, August 29, 2022

Morning

Afternoon

 

Tuesday, August 30, 2022

Morning

 

National Restaurant Jadranka Terrace

First YUCOMAT Poster Session

Competition for the best Oral presentation of young researchers

 

Session I: 08.30-10.00

Chairpersons: Bojana Obradović and Zoran Jovanović

 

YUCOMAT SYMPOSIUM A:
ADVANCED METHODS IN SYNTHESIS AND PROCESSING OF MATERIALS

 

P.S.I.A.1. Silica-based organo-inorganic hybrid materials with carboxyl groups for water purification

Viktoriia Kyshkarova1,2, Zbigniew Wzorek3, Anna K. Nowak3, Inna Melnyk1

1Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovakia, 2Technical University of Košice, Faculty of Materials, Metallurgy and Recycling, Košice, Slovakia, 3Cracow University of Technology, Krakow, Poland

 

P.S.A.2. Mg/Fe layered double hydroxides-based adsorbents for removal of inorganic toxicants commonly found in aquatic environments

Tetiana Hubetska, Victor Demchenko, Natalia Kobylinska

A.V. Dymansky Institute of Colloid and Water Chemistry NAS of Ukraine, Kyiv, Ukraine

 

P.S.I.A.3. Supercritical CO2 assisted deposition of MAPbBr3 perovskite onto TiO2 nanotubes

Milica Stefanović1, Ivana Lukić2, Jelena Vujančević3, Rada Petrović2, Đorđe Janaćković2

1Innovation Center of Faculty of Technology and Metallurgy, Ltd, Belgrade, Serbia, 2University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 3Institute of Technical Sciences of SASA, 11000, Belgrade, Serbia

 

YUCOMAT SYMPOSIUM B:

ADVANCED MATERIALS FOR HIGH-TECHNOLOGY APPLICATION

 

P.S.I.B.1. Crystal structure prediction and investigation of mechanical properties of the SiB6 compound through ab initio calculations

Tamara Škundrić1,2, Dejan Zagorac1,2, Aleksandra Zarubica3, Jelena Zagorac1,2, Milan Pejić 1,2, Dušica Jovanović 2,3, Peter Tatarko4, Branko Matović1,2

1Materials Science Laboratory, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Belgrade, Serbia,,2Center for synthesis, processing and characterization of materials for application in the extreme conditions “CextremeLab”, Belgrade, Serbia, 3Department of Chemistry, Faculty of Sciences and Mathematics, University of Niš, Niš, Serbia,    4Institute of Inorganic Chemistry, Slovak Academy of Sciences, 845 36 Bratislava, Slovakia

 

P.S.I.B.2. The influence of high-temperature annealing on the evolution of precipitates in Inconel 625 superalloy additively manufactured by laser powder bed fusion

Sylwia Staroń, Kewin Gola, Beata Dubiel

AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Kraków, Poland

 

P.S.I.B.3. The kinetics of g'' and d phase precipitation during the high temperature annealing of Inconel 625 additively manufactured by laser powder bed fusion

Hubert Pasiowieca, Beata Dubielb, Kewin Golac

AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science, Al. A. Mickiewicza 30, 30-059 Kraków, Poland

 

P.S.I.B.4. Cellulose nanocrystals with different surface functionalities as outstanding scaffolds for supercapacitor materials

Gordana Backović, Wim Thielemans

Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven, campus Kulak Kortrijk, Etienne Sabbelaan 53, 8500 Kortrijk, Belgium

 

P.S.I.B.5. A hierarchically porous all-polysaccharide composite anode for an asymmetric supercapacitor

Julien Lemieux, Wim Thielemans

Sustainable Materials Lab, Department of Chemical Engineering, KU Leuven, campus Kulak Kortrijk, Etienne Sabbelaan 53, 8500 Kortrijk, Belgium

P.S.I.B.6. Aqueous multivalent-ion chemistry of vanadium oxides: Novelties and Challenges

Milica J. Vujković 

University of Belgrade-Faculty of Physical Chemistry, Studentski trg 12-16, 11000 Belgrade, Serbia

 

P.S.I.B.7. pH-triggered sol-gel synthesis of Na4Fe3(PO4)2P2O7 cathode material

Aleksandra Gezović1, Miloš Milović2, Danica Bajuk-Bogdanović3, Veselinka Grudić1, Slavko Mentus3,4, Milica Vujković3

1University of Montenegro, Faculty of Metallurgy and Technology, Cetinjski put bb, Podgorica, Montenegro, 2Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Knez Mihajlova 35/IV, 11158 Belgrade, Serbia, 3University of Belgrade, Faculty of Physical Chemistry, Studentski Trg 12–16, Belgrade, Serbia, 4Serbian Academy of Sciences and Arts, Knez Mihajlova 35, Belgrade, Serbia

 

P.S.I.B.8. Experimental evaluation of mechanical anisotropic material behaviour of carbon reinforced PET-G material

Milan Janković1, A. Petrović1, V. Lojpur2, S. Dikić3, M. Miloš1, I. Balać1

1Faculty of Mechanical Engineering, University of Belgrade, Kraljice Marije 16, 11000 Belgrade, Serbia, 2Vinča Institute of Nuclear Sciences, University of Belgrade, Mike Pertovića Alasa 12-14, Vinča, 11000 Belgrade, Serbia, 3Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia

 

P.S.I.B.9. Fluidising low temperature thermochemical energy storage materials: degredation and damage assesment

Louis F. Marie, Tadhg S. O'Donovan

Heriot-Watt University, Edinburgh, EH14 4AS, United Kingdom

 

YUCOMAT SYMPOSIUM C:

NANOSTRUCTURED MATERIALS

 

P.S.I.C.1. Investigation of 3D printing and thermomechanical properties of free-radical resin filled with TiO2 nanoparticles

Juraj Svatík, Martina Korčušková, Martina Štaffová, Veronika Sevriugina, František Ondreáš, Petr Lepcio

Central European Institute of Technology, Brno University of Technology, Purkyňova 656/123, 61200 Brno, Czech Republic

 

P.S.I.C.2. Thiacarbocyanine dye TCC: features of J-aggregation in aqueous solutions and polymer films

Polina Pisklova1,2, Iryna Ropakova1, Svitlana Yefimova1, Alexander Sorokin1

1Institute for Scintillation Materials of NAS of Ukraine, Kharkiv, Ukraine, 2Institute of Physics, University of Rostock, Rostock, Germany

 

P.S.I.C.3. Influence of physical cross-linking by montmorillonite on structure and thermostability of hydrogel composites based on polyacrylamide

Olena Siryk1, Katarzyna Szewczuk-Karpisz2, Olena Goncharuk1, Yurii Samchenko1, Dariusz Sternik3

1Ovcharenko Institute of Biocolloidal Chemistry National Academy of Sciences of Ukraine, Akademika Vernadskogo Blvd. 42, 03680, Kyiv, Ukraine, 2Institute of Agrophysics, Polish Academy of Sciences, Doświadczalna 4, 20-290 Lublin, Poland, 3Maria Curie-Sklodowska University, M.C. Sklodowska Sq.3, 20031 Lublin, Poland

 

P.S.I.C.4. Effect of polymer molecular weight on thermal and surface structural characteristics of MWCNTs/PDMS nanocomposites

Iryna Sulym1, Mykola Borysenko1, Yuriy Sementsov1, Dariusz Sternik2, Anna Derylo-Marczewska2

1Chuiko Institute of Surface Chemistry of NASU, 17 General Naumov Str., 03164 Kyiv, Ukraine, 2Maria Curie-Skłodowska University, pl. Maria Curie-Skłodowskiej 3, 20‑031 Lublin, Poland

 

YUCOMAT SYMPOSIUM D:

ECO-MATERIALS AND ECO-TECHNOLOGIES

 

P.S.I.D.1. Waterborne polyurethanes based on poly(dimethylsiloxane)

Ivan Stefanović1, Jasna Džunuzović1, Enis Džunuzović2 and Carla Marega3

1Institute of Chemistry, Technology and Metallurgy, Department of Chemistry, University of Belgrade, Njegoševa 12, 11000 Belgrade, Serbia, 2Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11000 Belgrade, Serbia, 3Department of Chemical Sciences, University of Padova, via Marzolo 1, 35131 Padova, Italy

 

P.S.I.D.2. Structural characterization of geopolymers with the addition of egg shell

Sanja Knežević1, Marija Ivanović1, Miljana Mirković1, Ljiljana Kljajević1, Miloš Nenadović2, Vladimir Pavlović3 and Snežana Nenadović1

1Department Department of Materials, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia,University of Belgrade, Mike Petrovića Alasa 12-14, Vinča, 11000 Belgrade, Serbia, 2Department of Atomics Physics, Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Mike Petrovića Alasa 12-14, Vinča, 11000 Belgrade, Serbia, 3Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, University of Belgrade, Belgrade, Serbia

 

P.S.I.D.3. Sequential extractions and leaching tests as methods for characterization of mine tailings for the purpose of their probable application in eco-friendly geopolymers

Lyudmila Angelova, Darya Ilieva, Temenuzhka Radoykova, Andriana Surleva

University fo Chemical technology and Metallurgy,8 „St. Kl. Ohridski” blvd., 1756 Sofia, Bulgaria

 

P.S.I.D.4. Obtaining and characterising Cu-infused antimicrobial films formed from regenerated cellulose-CaCO3 composite

Aleksandra Ivanovska1, Nemanja Barac1, Vesna Radojević2, Petar Uskoković2, Đorđe Janaćković1,2, Ernest Barcelo3,4, Patrick Gane2,4, Mirjana Kostić1

1University of Belgrade, Innovation Center of the Faculty of Technology and Metallurgy in Belgrade Ltd., Karnegijeva 4, 11000 Belgrade, Serbia, 2University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11000 Belgrade, Serbia, 3Omya International AG, Baslerstrasse 42, 4665 Oftringen, Switzerland, 4Aalto University, Department of Bioproducts and Biosystems, School of Chemical Engineering, 00076 Aalto, Helsinki, Finland

 

P.S.I.D.5. Comparative study of biomass-derived carbon interfacial processes in Aluminum-based and conventional acidic electrolyte

Jana Mišurović1, Aleksandra Gezović1, Jugoslav Krstić2, Branislav Milovanović3, Veselinka Grudić1, Slavko Mentus3, Milica Vujković3

1Faculty of Metallurgy and Technology, University of Montenegro, Cetinjski put bb, 81000 Podgorica, Montenegro, 2Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, Belgrade, Serbia, 3Faculty of Physical Chemistry, University of Belgrade, Studentski trg 12–16, 11158 Belgrade, Serbia

 

YUCOMAT SYMPOSIUM E:

BIOMATERIALS

 

P.S.I.E.1. Laser-induced chemical and mophological changes of the titanium alloy surface  under different irradiation parameters

Slađana Laketić1, Marko Rakin2, Miloš Momčilović1, Jovan Ciganović1, Đorđe Veljović2, Ivana Cvijović-Alagić1

1Institute of Nuclear Sciences „Vinča“, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia; 2Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade, Serbia

P.S.I E.2. Search for "needles" of hydroxyapatite in the "haystack" of ovarian cancer

Ruslana Chyzhma, Roman Moskalenko

Sumy State University, Sumy, Ukraine

 

P.S.I.E.3. The role of oxalate nanocrystalline for the differential diagnostics of the breast pathology

Olena Kolomiiets1, Artem Piddubny 1,2, Serhey Danilchenko3, Roman Moskalenko1,2

1Department of Pathology, Sumy State University, Sumy, Ukraine, 2Ukrainian-Swedish Research center SUMEYA, Sumy State University, Sumy, Ukraine, 3Institute of Applied Physics, NAS of Ukraine, Sumy, Ukraine

 

P.S.I.E.4. Optimisation of a 3D in vitro model for osteosarcoma cell cultivation

Ivana Banićević1, Jelena Petrović2, Milena Milivojević3, Milena Stevanović3,4,5, Radmila Jankovic6, Jasmina Stojkovska1,2, Bojana Obradović1

1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 2 Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia, 3University of Belgrade, Institute of Molecular Genetics and Genetic Engineering, Belgrade, Serbia, 4University of Belgrade, Faculty of Biology, Belgrade, Serbia, 5 Serbian Academy of Sciences and Arts, Belgrade, Serbia, 6University of Belgrade, School of Medicine, Belgrade, Serbia

P.S.I.E.5.  Development of a 3D in vitro model based on alginate microfibers with immobilized cancer cells for cancer research and anticancer drug testing

Jelena Petrovic1,2, Ivana Banicevic1, Jasmina Stojkovska1,2, Miodrag Dragoj3, Milica Pesic3, Milena Milivojevic4, Milena Stevanovic4,5,6, Bojana Obradovic1

1University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia, 2Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia, 3University of Belgrade, Institute for Biological Research “Sinisa Stankovic” - National Institute of the Republic of Serbia, Belgrade, Serbia, 4University of Belgrade, Institute of Molecular Genetics and Genetic Engineering, Belgrade, Serbia, 5University of Belgrade, Faculty of Biology, Belgrade, Serbia, 6Serbian Academy of Sciences and Arts, Belgrade, Serbia

 

P.S.I.E.6. PCL-MXene composite electrospun membrane for nerve regeneration: structural and biological assessment

Kateryna Diedkova1, Yevhen Samokhin1, Veronika Zahorodna2, Ivan Baginskiy2, Vitalii Balitskyi2, Oleksiy Gogotsi2, Viktoriia Korniienko1

1Sumy State University, 31 Sanatorna St, Sumy 40007, Ukraine, 2Materials Research Centre, 3 Krzhizhanovskogo St, Kyiv 03680, Ukraine

 

P.S.I.E.7. 3D printed calcium phosphate cement scaffolds loaded with liposomal antibacterial enzymes for the prevention of osteomyelitis

Zuzana Kadlecová1, Kristýna Hlináková1, Lucy Vojtová1

1Central European Research Institute, Brno University of Technology, Brno, Czech Republic

 

P.S.I.E.8. Hydrogel dressings for phage therapy of chronic wounds

E. Černá1, L. Vacek2, F. Růžička2, B. Lipový3, M. Benešík4, T. Botka4, R. Pantůček4, L. Vojtová1

1Central European Institute of Technology, Brno University of Technology, Brno, Czech Republic, 2Department of Microbiology, St. Anne’s University Hospital Brno and Faculty of Medicine, Masaryk University, Brno, Czech Republic, 3Department of Burns and Plastic Surgery, University Hospital Brno and Faculty of medicine, Masaryk University, Brno, Czech Republic, 4Section of Genetics and Molecular Biology, Faculty of Science, Masaryk University, Brno, Czech Republic

 

P.S.I.E.9. Biomechanical DMA characterization of calcium and barium alginate hydrogel scaffolds

Alexandra Zühlke 1, Ivana Banicevic 2, Bojana Obradovic 2, Michael Gasik 1

1Aalto University Foundation, Espoo, Finland. 2University of Belgrade, Belgrade, Serbia

 

P.S.I.E.10. Hydroxyl radical scavenging activity of titanium oxide nanocrystals

Pavel Maksimchuk1, Kateryna Hubenko1, Vladyslav Seminko1, Andrey Onishchenko2, Iryna Bespalova1, Anatolii Onishchenko3, Volodymyr Prokopiuk3, Anton Tkachenko3, Svetlana Yefimova1

1Department of Nanostructured Materials, Institute for Scintillation Materials NAS of Ukraine, Kharkiv, Ukraine, 2Department of Physics, Kharkiv National University of Radio Electronics, Kharkiv, Ukraine, 3Research Institute of Experimental and Clinical Medicine, Kharkiv National Medical University, Kharkiv, Ukraine

 

P.S.I.E.11* Magnesium alloy with yttrium, gadolinium and calcium alloying elements designed for aviation applications

Jitka Stráská1, Stanislav Šašek1, Peter Minárik1, Robert Král1, Jozef Veselý1, Jiří Kubásek2

1Charles University, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, 121 16 Praha, Czech Republic, 2University of Chemistry and Technology, Faculty of Chemical Technology, Department of Metals and Corrosion Engineering, Technická 5, 166 28 Praha, Czech Republic

 

P.S.I.E.11* Resonance ultrasound spectroscopy measurements of elastic modulus of biomedical Ti-based alloys prepared by SPS

Josef Stráskýa, Jiří Kozlíka, Dalibor Preislera, Hanuš Seinerb, Michaela Janovskáb, Martin Kollerb, Miloš Janečeka

aDepartment of Physics of Materials, Faculty of Mathematics and Physics, Charles University, Czechia, bInstitute of Thermomechanics, Czech Academy of Sciences, Czechia


*They do not participate in the Competition for the best Poster Performance of young researchers


 

10.00-10.30 Break

 

Main Conference Hall

First WRTCS Plenary Session

Session I: 10.30-14.00

Chairpersons: Eugene A. Olevsky and Suk-Joong L. Kang

 

10.30-11.00 W.PL.S.I.1.

Eugene A. Olevsky

San Diego State University

Sintering assisted additive manufacturing

 

11.00-11.30 W.PL.S.I.2.

Rajendra Bordia, Fei Peng

Materials Science and Engineering, Clemson University,Clemson, SC 29634 USE

Challenges and opportunities for machine learning approaches for sintering and microstructure development

 

11.30-12.00  W.PL.S.I.3.

Olivier Guillon

Institute of Energy and Climate Research: Materials Synthesis and Processing  Forschungszentrum Jülich GmbH & RWTH Aachen University, Germany

Electric field assisted sintering of oxide ceramics: fields matter!

 

12.00-12.30 Break

 

12.30-13.00 W.PL.S.I.4.

Hamish Fraser

Center for the Accelerated maturation of Materials, Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, USA

Enhancing powder metallurgy processing using advanced microstructural characterization and physical metallurgy

 

13.00-13.30 W.PL.S.I.5.

Sotiris E. Pratsinis

Particle Technology Laboratory, Institute of Process Engineering, Swiss Federal Institute of Technology (ETH Zurich), CH-8092 Zurich, Switzerland

The role of sintering in process design for aerosol synthesis of nanostructured materials

 

11.30-12.00  W.PL.S.I.6.

Suk-Joong L. Kang

KAIST, Daejeon, Korea

Grain growth: the mixed control mechanism of atom transport

 

14.00-15.00 Break

 

Afternoon

 

Wednesday, August 31, 2022

Morning

 

Thursday, September 1, 2022

Morning

 

Friday, September 2, 2022

Morning