Scientific Program

 Book of Abstracts

Second Poster Session, National Restaurant Jadranka Terrace

Competition for the best poster presentation by young researchers

 

Session II: 08⁰⁰ - 09³⁰
Chairpersons: Joanna Kulasa, Martina Urbanova

Posters P.S.27. to P.S.56. - Poster Sessions

 

09³⁰10⁰⁰ Break

 

FOURTH PLENARY SESSION, Main Conference Hall

Session II: 10⁰⁰ - 11³⁰

Theme: Materials for Sustainable Energy
Chairpersons: Rishi Raj, Maurizio Prato, Mohammad Khaja Nazeeruddin

10⁰⁰-10³⁰ PL.S.15.
Perovskite solar cells: From fundamental interface engineering to industrialisation
Mohammad Khaja Nazeeruddin
Institute of Perovskite Photovoltaics and Integrated Electronics, Southeast University, China and Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia

10³⁰-11⁰⁰ PL.S.16.
Flash-sintering+: Ultrafast rates of diffusion via defect generation
Rishi Raj
University of Colorado Boulder, Boulder CO, 80309, USA

11⁰⁰-11³⁰ PL.S.17.
Artificial quantasomes: Bioinspired assemblies for clean fuel production
Maurizio Prato
Department of Chemical and Pharmaceutical Sciences, University of Trieste, Italy, CIC BiomaGUNE, San Sebastián, Spain

11³⁰-12⁰⁰ Break

 

FIRST INVITED ORAL SESSION, Main Conference Hall

Session III: 12⁰⁰-14⁰⁰
Chairpersons: Giovanni De Ninno, Jiaxing Huang, Gary Admans

12⁰⁰-12²⁰ I.O.S.1.
Circular materials characterisation at the ESRF synchrotron through the European project ReMade@ARI
Gary Admans
ESRF - The European Synchrotron, Grenoble, France

12²⁰-12⁴⁰ I.O.S.2.
Advanced materials research with ultrafast and coherent X-rays at the FERMI free-electron laser
Giovanni De Ninno
Elettra Sincrotrone Trieste, Trieste, Italy University of Nova Gorica, Nova Gorica, Slovenia

12⁴⁰-13⁰⁰ I.O.S.3.
Surface passivation and reconditioning of reactive metals
Jiaxing Huang
Department of Materials Science and Engineering, Westlake University, Hangzhou, China

13⁰⁰-13²⁰ I.O.S.4.
Transition-metal cross-linked alginates: domain architecture and structure as seen by paramagnetic ss-NMR spectroscopy and heterospectral machine learning
Jiri Brus
Department of Strucuture Analysis, Institute of Macromolecular Chemistry, Czech Academy of Sciences, Czech Republic

13²⁰-13⁴⁰ I.O.S.5.
Strain-driven photocatalysis modulated by polydopamine interfaces
Emerson Coy
NanoBioMedical Centre, Adam Mickiewicz University in Poznań, Poznań, Poland

13⁴⁰-14⁰⁰ I.O.S.6.
Ready BODIPY-tagging of carboxylic acids
Eduardo Peña-Cabrera
Departamento de Química, Universidad de Guanajuato. Noria Alta S/N. Guanajuato, Mexico

14⁰⁰-15⁰⁰ Break

 

SECOND INVITED ORAL SESSION, Main Conference Hall

Session IV: 15⁰⁰-19⁰⁰
Chairpersons: Robert Dominko, Alejandro Sosnik, Yadong Wang, Vuk Uskoković

15⁰⁰-15²⁰    I.O.S.7.

Persistent luminescence nanoparticles for biosensors and bioimaging
Bruno Viana
PSL University, Chimie-ParisTech, IRCP-CNRS, Paris, France

15²⁰-15⁴⁰ I.O.S.8. 
Designing self-assembled nanomaterials for targeted drug delivery to the central nervous system
Alejandro Sosnik
Laboratory of Pharmaceutical Nanomaterials Science, Faculty of Materials Science and Engineering, technion - Israel Institute of Technology, Haifa, Israel

15⁴⁰-16⁰⁰ I.O.S.9.
Bioinspired metallo-elastomers
Yadong Wang
School of Biomedical Engineering, Cornell University, Ithaca, USA

16⁰⁰-16²⁰ I.O.S.10
Calcium phosphates in the 21^st century
Vuk Uskoković
Keck Center for Science and Engineering 350, Chapman University's Schmid College of Science & Technology, USA

16²⁰-16⁴⁰ I.O.S.11.
3D-nano printed bioceramics for personalized bone healing
Hala Zreiqat
Biomaterials and Tissue Engineering Unit, University of Sydney, Sydney Australia

16⁴⁰-17⁰⁰    I.O.S.12.

The quest for high temperature superconducting nickelates
A. Ariando
Department of Physics, National University of Singapore, Singapore

17⁰⁰-17²⁰    Break

17²⁰-17⁴⁰    I.O.S.13.

Defect engineering of perovskites for next-generation optoelectronics
Hobeom Kim
Department of Materials Science and Engineering, Gwangju Institute of Science and Technology (GIST), Korea

17⁴⁰-18⁰⁰    I.O.S.14.
Polymer Interphases designed with single-ion conducting polymers
Robert Dominko
National Institute of Chemistry, University of Ljubljana, Faculty of Chemistry and Chemical Technology, Ljubljana, Slovenia, ALISTORE -European Research Institute, Cedex, France

18⁰⁰-18²⁰    I.O.S.15.
Polysiloxane-based single-ion conducting polymer electrolyte for Na-metal batteries
Dominic Bresser
Helmholtz Institute Ulm (HIU), Karlsruhe Institute of Technology (KIT), Ulm University (UUlm), Ulm, Germany

18²⁰-18⁴⁰    I.O.S.16.
Electrocatalysis and charge storage using transition metal dichalcogenide based nano-heterostructures
Sameer Sapra
Department of Chemistry, Indian Institute of Technology Delhi, Hauz Khas, New Delhi, India

18⁴⁰-19⁰⁰    I.O.S.17.
Recent progresses in the fabrication of active materials for hybrid water electrolysis: a chemical perspective
Davide Barreca
CNR-ICMATE and INSTM, Padova, Italy

 

SECOND ORAL SESSION, Small Conference Hall

Session V: 15⁰⁰-19¹⁵
Chairpersons: László Himics, Anna Ivanova

YUCOMAT SYMPOSIUM A: ADVANCED METHODS IN SYNTHESIS AND PROCESSING OF MATERIALS

15⁰⁰-15¹⁵ O.S.23.
Graphene quantum dots vs carbon dots: synthesis, morphology, doping
Albina Mikhraliieva¹, Volodymyr Zaitsev²
Tallinn University of Technology (TalTech), Estonia¹, Pontifical Catholic University of Rio de Janeiro, Brazil²

15¹⁵-15³⁰ O.S.24.
Innovative heating solution for cost-effective and sustainable pultrusion technology
Evgeny Barkanov, Pavel Akishin
Institute of High-Performance Materials and Structures, Riga Technical University, Riga, Latvia

15³⁰-15⁴⁵ O.S.25.
Patterning-free synthesis and characterization of nanocrystalline diamond micro-architectures
László Himics¹, Dávid Gál¹, Péter Csíkvári², Roman Holomb¹, Miklós Veres^1
1Department of Applied and Nonlinear Optics, Institute for Solid State Physics and Optics, HUN-REN Wigner Research Centre for Physics, Budapest, 1121, Hungary, ²Department of Atomic Physics, Faculty of Natural Sciences, Budapest University of Technology and Economics, Budapest, 1111, Hungary

15⁴⁵-16⁰⁰ O.S.26.
Copper nitride thin films deposited via reactive pulsed laser deposition: from plasma diagnostics to atomic structure, electrical and optical properties
Sergii Chertopalov, Stefan Andrei Irimiciuc, Martin Vondráček, Pavel Hubík, Ladislav Fekete, Jiří Bulíř, Ján Lančok
Institute of Physics of the Czech Academy of Sciences, Na Slovance 1999/2, 18200 Prague 8, Czechia

16⁰⁰-16¹⁵ O.S.27.
High-performance aluminium-based materials for tribological applications made by spark plasma sintering
Johannes Trapp¹, Thomas Schubert¹, Andreas Storz², Dumitru Mitica³, Thomas Weißgärber^1
1Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM, Dresden Branch, Winterbergstraße 28, 01277 Dresden, Germany, ²Sigma Materials GmbH, Hauptstrasse 28, 40699 Erkrath, Germany, ³Institutul pentru Metale Neferoase și Rare-IMNR, Bulevardul Biruinței 178, 077145 Pantelimon, Romania

16¹⁵-16³⁰ O.S.28.
CON1D modeling and measurement of microsegregation in a continuously cast steel slab
Anna Ivanova, Brian G. Thomas
Continuous Casting Center, Colorado School of Mines, USA

16³⁰-16⁴⁵ O.S.29.
Thermally induced in situ carbon quantum dot formation in polyampholyte hydrogels for dual volumetric and fluorometric pH sensing
Aleyna İşler¹, Hande Gündüz^2,3, Fikrettin Şahin⁴, Z. Cansu Canbek¹, Volkan Can^1
1Department of Materials and Nanotechnology Engineering, Yeditepe University, Istanbul, Turkey, ²Department of Chemistry, Koç University, 34450 Istanbul, Turkey, ³Nanofabrication and Nanocharacterization Center for Scientific and Technological Advanced Research, Koç University, 34450 Istanbul, Turkey, ⁴Department of Genetics and Bioengineering, Yeditepe University, Istanbul, Turkey

YUCOMAT SYMPOSIUM B: ADVANCED MATERIALS FOR HIGH-TECHNOLOGY APPLICATION

16⁴⁵-17⁰⁰ O.S.30.
Additive manufacturing of glass architectures: From nanoporosity to bioinspired applications
Diana Lago¹, Jozef Kraxner1, Martin Michálek¹, Martin Schwentenwein^2
1FunGlass - Centre for Functional and Surface Functionalized Glass, Slovakia, ²Lithoz GmbH, Mollardgasse 85A/2/64-69, 1060, Vienna, Austria

17⁰⁰-17¹⁵ O.S.31.
Design strategies for enhanced thermoelectric performance: MXene-based nanostructures and other 2D materials
Magdalena Popielska
Faculty of Physics, University of Warsaw, Pasteura 5, PL-02093 Warsaw, Poland

17¹⁵-17³⁰ O.S.32.
Harnessing magnetic torque for biofilm disruption and bacterial eradication via magnetic nanoblades
Vincent Pautu¹, Laurine Marger², Maja Caf^3,4, Nika Zaveršek^5,6, Fabrice Marger^1,2, Aleš Berlec^3,5, Jerica Sabotič^5,6, Mustapha Mekki², Slavko Kralj^3,4, Irena Milošević^1
1HEPIA, HES-SO University of Applied Sciences and Arts Western Switzerland, Geneva, Switzerland, ²Laboratory of Biomaterials, Faculty of Medicine, University Clinics of Dental Medicine, University of Geneva, Genève, Switzerland, ³Department for Materials Synthesis, Jožef Stefan Institute, Jamova 39, Ljubljana, Slovenia, ⁴Faculty of Pharmacy, University of Ljubljana, Aškerčeva 7, Ljubljana, Slovenia, ⁵Department of Biotechnology, Jožef Stefan Institute, Jamova ulica 39, Ljubljana 1000, Slovenia, ⁶University of Ljubljana, Biotechnical faculty, Jamnikarjeva 101, Ljubljana 1000, Slovenia

17³⁰-17⁴⁵ O.S.33.
UV-Vis absorption and fluorescence properties of TiO₂ photocatalytic coating
Nima E. Gorji
Mechatronic Engineering, Technological University Dublin, Dublin 15, Ireland

17⁴⁵-18⁰⁰ O.S.34.
Erythrotoxicity of Mn₃O₄ nanocrystals is mediated by induction of eryptosis
Yuriy Kot¹, Volodymyr Prokopiuk^2,3, Vladimir Klochkov⁴, Pavel Maksimchuk⁴, Lesya Demchenko^5,6, Anatolii Onishchenko², Svitlana Yefimova⁴, Ondrej Havranek⁷, Anton Tkachenko^7
1V.N. Karazin Kharkiv National University, Kharkiv, Ukraine, ²Institute for Problems of Cryobiology and Cryomedicine, Kharkiv, Ukraine, ³Kharkiv National Medical University, Kharkiv, Ukraine, ⁴Institute for Scintillation Materials, Kharkiv, Ukraine, ⁵Stockholm University, Stockholm, Sweden, ⁶National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine, ⁷Charles University, Prague, Czech Republic

18⁰⁰-18¹⁵ O.S.35.
CERIC and ReMade@ARI: Contributing to the next-generation circular economy materials
Marcello Maria Turconi, Sara Scipioni, Giulia Puppini
CERIC-ERIC

18¹⁵-18³⁰ O.S.36.
Optimization of dissimilar AA5083-AZ91 lap joint using friction stir welding technique
Marios Kazasidis¹, Ioannis Papantoniou², Angelos Markopoulos², Konstantinos Karagiannis^2
1TUC, Chania, Greece, ²NTUA, Athens, Greece

18³⁰-18⁴⁵ O.S.37.
Bioinspired surface chemistry and zwitterionic biomaterials for antifouling applications
Woo Kyung Cho¹, Kang Moo Huh^2
1Department of Chemistry, Chungnam National University, Republic of Korea, ²Department of Polymer Science and Engineering, Chungnam National University, Republic of Korea

18⁴⁵-19⁰⁰ O.S.38.
Photoelectron diffraction of antimonene bilayers on Bi₂Se₃
S. Colonna¹, P.M. Sheverdyaeva², P. Moras², F. Ronci¹, R. Flammini¹, M. Babalny³, E.V. Chulkov⁴, Z.S. Aliev⁵, R. Gunnella^6
1Istituto di Struttura della Materia-CNR (ISM-CNR), Roma, Italy, ²CNR-Istituto di Struttura della Materia (CNR-ISM) Trieste, Italy, ³Institute of Catalysis and Inorganic Chemistry, Azerbaijan National Academy of Science, Baku, Azerbaijan, ⁴Centro de Fí sica de Materiales, CFM-MPC, CSIC-UPV/EHU, 20080 San Sebastian/Donostia, Basque Country, Spain, ⁵Azerbaijan State Oil and Industry University, AZ1010 Baku, Azerbaijan, ⁶Scuola di Scienze e tecnologie, Universita di Camerino, Italy

19⁰⁰-19¹⁵ O.S.39.
Recent advances in the percolation model for the study of disorder in materials
Panos Argyrakis
Department of Physics, University of Thessaloniki, Thessaloniki, Greece