Poster Sessions
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
MRS Serbia
YUCOMAT & WRTCS 2019
Joint Conference
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
MRS Serbia
YUCOMAT & WRTCS 2019
Joint Conference
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
Joint Conference
YUCOMAT & WRTCS 2019
MRS Serbia
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
Joint Conference
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
MRS Serbia
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
Joint Conference
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
MRS Serbia
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
Joint Conference
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
MRS Serbia
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
MRS Serbia
YUCOMAT & WRTCS 2019
Joint Conference
YUCOMAT & WRTCS 2019
Herceg Novi, Montenegro, September 2–6, 2019
YUCOMAT & WRTCS 2019
Joint Conference

Download the Final Programme 

Tuesday, September 3, 2019

 

POSTER SESSION I: 2000-2200

 

Villa Mimoza

 

Chairpersons: Vuk V. Radmilović and Željko Radovanović

YUCOMAT SYMPOSIUM A - ADVANCED METHODS IN THE SYNTHESIS AND PROCESSING OF MATERIALS
 

P.S.A.1.      

Physicochemical properties of cobalt ferrite nanoparticles synthetized by using linear surfactants and non-planar stereogenic-at-metal complexes

Ivan Kozenkov1, Sonja Jovanović2,3, Rafiali Rafializade1, Alexander Bulychev1, Valeria Rodionova1

1Laboratory of novel magnetic materials, Immanuel Kant Baltic Federal University, Kaliningrad, Russia; 2Advanced materials department, Jožef Stefan Institute, Ljubljana, Slovenia; 3Laboratory of Physics, Vinca Institute of Nuclear Sciences, University of Belgrade, Belgrade, Serbia

P.S.A.2.      

Hall-Petch relation in harmonic structure designed Ni compacts

Hiroki Hino1, Bhupndra Sharma2, Mie Kawabata2, Kei Ameyama2

1Graduate School of Science and Engineering, Ritsumeikan University; 2Faculty of Science and Engineering, Ritsumeikan University, Shiga, Japan

P.S.A.3.      

Preferential recrystallization by thermo-mechanical processing in pure titanium with harmonic structure

Kyohei Hayashi1, Akito Shimamura1, Bhupendra Sharma2, Mie Kawabata2, Kei Ameyama2

1Gruduate School of Science and Engineering Ritsumeikan University, Kusatsu/Shiga, Japan; 2Department of Mechanical Engineering Ritsumeikan University, Kusatsu/Shiga, Japan

P.S.A.4.      

Microstructure and mechanical properties of harmonic structure designed Cu-9 at% Ge alloy

Kenta Hori1, Bhupndra Sharma2, Mie Kawabata2, Kei Ameyama2

1Graduate School of Science and Engineering, Ritsumeikan University, Kusatsu/Shiga, Japan; 2Faculty of Science and Engineering, Ritsumeikan University, Shiga, Japan

P.S.A.5.      

Effect of UFG structure on mechanical properties in harmonic structure designed pure-Ni

Taiki Kambara1, Masaya Nagata2, Bhupendra Sharma3, Mie Kawabata3, Kei Ameyama3

1Graduate School of Science and Engineering Ritsumeikan University, Kusatsu/Shiga, Japan; 2Japan Patent Office, Tokyo, Japan; 3Department of Mechanical Engineering Ritsumeikan University, Kusatsu/Shiga, Japan

P.S.A.6.

Harmonic structure design of Co-Cr-Mo alloy and its mechanical properties

Sho Matsumura, Bhupendra Sharma, Mie Kawabata, Kei Ameyama

Department of Mechanical Engineering, Ritsumeikan University, Kusatsu/Shiga, Japan

P.S.A.7.

Improvement of mechanical properties of harmonic structure SUS304L by thermo-mechanical process

Taishu Tsujino1, Masashi Nakatani1, Bhupendra Sharma2, Mie Kawabata2, Kei Ameyama2

1Gruduate School of Science and Engineering Ritsumeikan University, Kusatsu/Shiga, Japan; 2Department of Mechanical Engineering Ritsumeikan University, Kusatsu/Shiga, Japan

P.S.A.8.      

Plasma electrolysis oxidation using a pulsed unipolar power supply to improve electrochemical behavior of 316L austenitic steel

Victor Aurel Andrei1, Viorel Malinovschi2, Cristiana Rădulescu1, Elisabeta Coaca3, Ioana Daniela Dulama1

1Valahia University of Targoviste, Institute of Multidisciplinary Research for Science and Technology, 130004 Targoviste, Romania; 2University of Pitesti, 110040 Pitesti, Romania; 3Institute for Nuclear Research, str. Campului, 1, Mioveni, Arges, Romania

P.S.A.9.    

Synthesis of titanium nitride via hybrid polymeric composites

Anca Dumitru1, Sorina Iftimie1, Anita Radu2, Andreea Miron2, Andrei Sarbu2, Cristian Panaiotu1, Claudiu Locovei1,3, Carmen Lazau4

1Faculty of Physics, University of Bucharest, Bucharest-Magurele, 077125, Romania; 2National Research and Development Institute for Chemistry and Petrochemistry INCDCP-ICECHIM, Advanced Polymer Materials and Polymer Recycling, 060021 Bucharest, Romania; 3National Institute of Materials Physics, Bucharest-Magurele, 077125, Romania; 4National Institute for Research and Development in Electrochemistry and Condensed Matter, 300224 Timisoara, Romania

P.S.A.10.    

Synthesis, structural modelling and functional properties of amorphous transition metal polysulfides

Ekaterina D. Grayfer1, Sofya B. Artemkina1, Andrey N. Enyashin2, Anastassiia A. Poltarak1, Anastasiia D. Fedorenko1, Pavel A. Poltarak1, Mariia N. Ivanova1, Sung-Jin Kim3, Vladimir E. Fedorov1,4

1Nikolaev Institute of Inorganic Chemistry, Siberian Branch of Russian Academy of Sciences, 3, Acad. Lavrentiev Ave., Novosibirsk, 630090, Russia; 2Institute of Solid State Chemistry, Ural Branch of Russian Academy of Sciences, 91, Pervomayskaya st., Ekaterinburg, 620990, Russia; 3Ewha Womans University, Division of Nano Sciences/Department of Chemistry, Daehyun-dong, Seodaemun-gu, 11-1, Seoul 120-750, Republic of Korea; 4Novosibirsk State University, 2, Pirogova street, Novosibirsk, 630090, Russia

P.S.A.11.    

Application of high intensity ultrasound for obtaining magnesium hydroxide from seawater

Jelena Jakić, Miroslav Labor, Vanja Martinac, Ana Marija Šunjić

Faculty of Chemistry and Technology, Ruđera Boškovića 35, 21000 Split, Croatia

P.S.A.12.    

Thin films for multilayer devices by tape casting method

Serhii Ivanchenko, Saide Umerova, Dmytro Baranovskyi, Andrey V. Ragulya

Frantsevich Institute for Problems of Materials Science of National Academy of Sciences of Ukraine, Kiev, Ukraine; Nanotechcenter LLC, Kiev, Ukraine

P.S.A.13.    

Investigation of ZrN-ZrB2 composition synthesis by spark plasma sintering method

Olexander Petukhov, Hanna Borodianska, Andrey Ragulya

Frantsevich Institute for Problems of Materials Science of National Academy of Sciences of Ukraine, Kiev, Ukraine

P.S.A.14.    

Synthesis, crystal structures and magnetic properties of mono and dinuclear Cu(II) complexes with the condensation product of 2-acetylpyridine and Girard's T reagent

Nevena Stevanović1, Dušanka Radanović2, Milica R. Milenković1, Božidar Čobeljić1 and Katarina Anđelković1

1Faculty of Chemistry, University of Belgrade, Studentski trg 12-16, 11000 Belgrade, Serbia; 2Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, P.O. Box 815, 11000 Belgrade, Serbia

P.S.A.15.    

Development of sugarcane bagasse reinforced onibode clay composite for high voltage insulation

J. Agboola1, S.B. Hassan2, A.A. Lukman3

1Department of Materials and Metallurgical Engineering, Federal University of Technology, Minna, Nigeria; 2National Institute of Mining and Geosciences, Jos, Nigeria; 3Department of Metallurgical and Materials Engineering, University of Lagos, Lagos, Nigeria

P.S.A.16.

Vacuum UV spectroscopy for improvement of Calibration Free LIBS analysis of Si, Ge and Sn containing alloys

Pavel Veis1, Alicia Marín Roldán1, Jaroslav Krištof1,2

1DEP, FMPI, Comenius University, Mlynská dol. F2, Bratislava 842 48 Slovakia;  2Graduate School of Science and Technology, Shizuoka Univ., Hamamatsu, 432-8561 Japan 

 

YUCOMAT SYMPOSIUM B - ADVANCED MATERIALS FOR HIGH-TECHNOLOGY APPLICATION
 

P.S.B.1.      

Cost effective alloys based catalysts for alkaline fuel cells application

Ljiljana Gajić-Krstajić1, Borka Jović2, Vladimir Jović2, Piotr Zabinski3, Nevenka Elezović2

1Institute of Technical Sciences of Serbian Academy of Science and Arts, Knez Mihajlova 45, 11000 Belgrade, Serbia; 2Institute for Multidisciplinary Research University of Belgrade, P.O. Box 33, 11030 Belgrade, Serbia; 3AGH University of Science and Technology, Faculty of Non-Ferrous Metals, Al. Mickiewicza 30, Krakow, Poland

P.S.B.2.      

Polyanionic cathode material Na4Fe3(PO4)2P2O7/C for aqueous sodium-ion batteries

Aleksandra Gezović1, Veselinka Grudić1, Miloš Milović2, Danica Bajuk-Bogdanović3, Milica Vujković3

1University of Montenegro, Faculty of Metallurgy and Techology, Podgorica, Montenegro; 2Institute for Nuclear Sciences Vinča, Belgrade, Serbia; 3University of Belgrade, Faculty of Physical Chemistry, Belgrade, Serbia

P.S.B.3.      

Thermolysis prepared Co3O4 carbon paste electrode decorated with single wall nanotubes as voltammetric sensor for determination of antioxidant α-lipoic acid

Branka B. Petković1, Dalibor M. Stanković2, Miloš Ognjanović2, Vyacheslav Viktorovich Avdin3, Magdalena Radović2, Dragan D. Manojlović4, Sanja Vranješ Đurić2

1University of Priština-Kosovska Mitrovica, Faculty of Sciences, Lole Ribara 29, 38220 Kosovska Mitrovica, Serbia; 2The Vinča Institute of Nuclear Sciences, Mike Petrovića Alasa 12-14, 11000, Belgrade, Serbia; 3South Ural State University, 76, Lenin prospekt, Chelyabinsk, Russia, 454080; 4University of Beograd, Faculty of Chemistry, Studentski trg 12-16, Beograd, Serbia

P.S.B.4.      

Special application possibilities of metakaolin based geopolymer foams

Adrienn Boros, Tamás Korim

Institute of Materials Engineering, University of Pannonia, Veszprém, Hungary

P.S.B.5.      

Ultra-fast volume-responsive temperature- and pH-sensitive poly(N-isopropylacrylamide) hydrogels

Sabina Horodecka, Khrystyna Hishchak, Beata Strachota, Adam Strachota, Miroslav Šlouf

Institute of Macromolecular Chemistry, Czech Academy of Sciences, Heyrovského nám. 2, CZ‑162 06 Praha 6, Czech Republic

P.S.B.6.      

X-ray spectra, electron structure and physical properties of the Ce2ScSi2 and СеScSi compounds

I. D. Shcherba1, V. N. Antonov2, H Noga3, D. Uskokovic4, Z. M. Shpyrka1, B. M. Yatcyk5

1Ivan Franko National University, Kyryla & Mefodiya Str. 8, 79-005 Lviv, Ukraine; 2Institute of Metal Physics, NASU, Vernadskyj Str. 36, 03-142 Kiev, Ukraine; 3Institute of Technology, Pedagogical University, Podchoranzych Str. 2, Cracow, Poland; 4Institute of Technical Sciences of SASA Knez Mihailova 35/IV, Belgrade, Serbia; 5Lviv National University of Veterinary Medicine and Biotechnologies, Lviv, Ukraine

P.S.B.7.    

Theory and experiment - Slowing probe and conjugate pulses in potassium vapor using Four Wave Mixing

Željka Nikitović, Marija Ćurčić, Bojan Zlatković, Ivan Radojičić, Dušan Arsenović and Branislav Jelenković

Institute of Physics University of Belgrade, Pregrevica 118, 11080 Belgrade, Serbia

P.S.B.8.

Cup anemometer friction torque and classification according IEC standard

Miodrag Zlatanović1,2, Ivan Popović2

1Wind Electricity doo, Belgrade, Serbia; 2School of Electrical Engineering, Belgrade, Serbia

 

 

Wednesday, September 4, 2019

 

POSTER SESSION II: 2000-2200

 

Villa Mimoza

 

Chairpersons: Zoran Jovanović and Đorđe Veljović

YUCOMAT SYMPOSIUM B - ADVANCED MATERIALS FOR HIGH-TECHNOLOGY APPLICATION


P.S.B.9.    

Laser welding of similar materials

Agnieszka Radziszewska1, Sławomir Kąc1, Włodzimierz Zowczak2, Olaf Czyż1, Damian Koclęga1, Bogdan Antoszewski2

1Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology in Krakow, al. Mickiewicza 30, 30-059 Krakow, Poland; 2Kielce University of Technology, Faculty of Mechatronics and Machine Desing, 1000-lecia Panstwa Polskiego 7, 25-314 Kielce, Poland

P.S.B.10.    

Corrosion resistance of high Al and MgSi Zinc alloys for batch hot dip galvanizing

Mariola Saternus, Henryk Kania

Silesian University of Technology, Gliwice, Poland

P.S.B.11.    

The properties of ZnAlMgSi alloys for batch hot dip galvanizing

Henryk Kania, Mariola Saternus

Silesian University of Technology, Gliwice, Poland

P.S.B.12.    

The effect of a single shock processing on mechanical properties Al-Li 2099 (T-83) alloy

O. Filatov1, S. Bogdanov1, V. Mazanko1, S. Vorona1, I. Bogdanov1, S. Kotrechko1, O. Zatsarna1, L. Kaczmarek2, M. Klich2

1G. V. Kurdyumov Institute for Metal Physics of the N.A.S. of Ukraine, Kiev, Ukraine; 2Lodz University of Technology, Faculty of Mechanical Engineering, Lodz, Poland

P.S.B.13.    

Influence of the impurity segregation on the adhesion properties of Al2O3/Ti3Al interface

Alexander V. Bakulin1,2, Artem A. Fuks2, Svetlana E. Kulkova1,2

1Institute of Strength Physics and Materials Science SB RAS, Tomsk, Russia; 2Tomsk State University, Tomsk, Russia

P.S.B.14.    

Localized plastic deformation autowaves under tension of nitinol specimens

Lidya V. Danilova, Vadim V. Gorbatenko, Vladimir I. Danilov

Institute of Strength Physics and Materials Science SB RAS, Tomsk, Russia

P.S.B.15.    

DMA and TMA study of glass transition in Cu-Zr based bulk metallic glasses

Viktor Soprunyuk1, Florian Spieckermann2, Baran Sarac1, Amir Rezvan1, Wilfried Schranz3 and Jürgen Eckert1,2

1Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben 8700, Austria; 2Chair of Materials Physics, University of Leoben, Leoben 8700, Austria; 3University of Vienna, Faculty of Physics, Physics of Functional Materials, Boltzmanngasse 5, A-1090 Wien, Austria

P.S.B.16.     

High-temperature phase relations in the Bi2O3-Mn2O3-M2O3 (M=Fe, Ga, Al) pseudo-ternary systems

S. Škapin1, A. Golobič2, D. Suvorov1, M. Spreitzer1

1Advanced Materials department, Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Slovenia; 2Faculty of Chemistry and Chemical Technology, Večna pot 113, 1000 Ljubljana, Slovenia

P.S.B.17.    

Low-temperature superplasticity of Ek61 and Ep975 superalloys with ultrafine-graned structure

Vener Valitov, Elvina Galieva, Aerika Bikmukhametova

Institute for Metals Superplasticity Problems of Russian Academy of Sciences, Ufa, Russia

P.S.B.18.

Mechanical and microstructural properties of TRIP-matrix composites studied by neutron scattering methods

Gizo Bokuchava1, Yulia Gorshkova1, Igor Papushkin1, Sergey Guk2

1Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research, Dubna, Russia; 2Institute for Metal Forming, TU Bergakademie Freiberg, Freiberg, Germany

P.S.B.19.

Modeling of the processes of deformation of targets from single-crystal alloy VZHM8 under shock loading

Elena V. Tuch, Ekaterina A. Strebkova

Institute of Strength Physics and Materials Science of Siberian Branch Russian Academy of Sciences, 2/4, pr. Akademicheskii, Tomsk, 634055, Russia  

P.S.B.20.

Investigations on magnetic properties of the Fe5-xCoxSiB2 alloys

Razvan Hirian1, Olivier Isnard2, Viorel Pop1 and Diana Benea1

1Faculty of Physics, Babes-Bolyai University, Kogãlniceanu str 1, 400084 Cluj-Napoca, Romania; 2Université Grenoble Alpes, Institut Néel, Grenoble, F-38042, France

 

YUCOMAT SYMPOSIUM C - NANOSTRUCTURED MATERIALS
 

P.S.C.1.      

Microstructure of Half-Heusler thermoelectric alloys after severe plastic deformation

Jiří Buršík1, Gerda Rogl2, Peter Franz Rogl2

1Institute of Physics of Materials of the Czech Academy of Sciences, Žižkova 22, CZ-61662 Brno, Czech Republic; 2Institute of Materials Chemistry, University of Vienna, Währingerstrasse 42, A-1090 Wien, Austria

P.S.C.2.      

Multiple twinning and stacking faults in silver dendrites

Vuk V. Radmilović1, Josh Kacher2, Evica Ivanović3, Andrew Minor4 and Velimir Radmilović1,5

1Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, P.O.B. 3503, 11120 Belgrade, Serbia; 2 Department of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332, United States; 3Faculty of Agriculture, University of Belgrade, Nemanjina 6, Zemun, 11000 Belgrade, Serbia; 4Department of Materials Science and Engineering, University of California, Berkeley, and National Center for Electron Microscopy, Molecular Foundry, Lawrence Berkeley National Laboratory, Berkeley, CA 94720, United States; 5Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000, Belgrade, Serbia

P.S.C.3.      

HPHT synthesis of nano-sized diamonds doped with Si or 13C for biological and medical applications

Viatcheslav Agafonov1, Valery Davydov2, Ludmila Kulikova2, Rustem Uzbekov3, Taras Plakhotnik4

1GREMAN, University of Tours, Tours, France; 2L.F. Vereshchagin Institute for High Pressure Physics, RAN, Troitsk, Moscow, Russia; 3Laboratory of Cell biology and Electron microscopy, University of Tours, Tours, France; 4School of Mathematics and Physics, the University of Queensland, Queensland, Australia

P.S.C.4.      

Oxygen storage capacity versus catalytic activity of ceria–zirconia solid solutions in CO and HCl oxidation

Igor Đerđ1, Yu Sun2,3, Chenwei Li2,3, Omeir Khalid2, Pascal Cop2, Joachim Sann2, Tim Weber2, Sebastian Werner2, Kevin Turke2, Yanglong Guo3, Bernd M. Smarsly2 and Herbert Over2

1Department of Chemistry, Josip Juraj Strossmayer University of Osijek, Cara Hadrijana 8/A, 31000 Osijek, Croatia; 2Physikalisch-Chemisches Institut, Justus-Liebig-Universität, Heinrich-Buff-Ring 17, 35392 Gießen, Germany; 3Key Laboratory for Advanced Materials, Research Institute of Industrial Catalysis, School of Chemistry and Molecular Engineering, East China University of Science and Technology, Shanghai 200237, PR China

P.S.C.5

Structure, morphology and photocatalytic properties of CoxMg1-xFe2O4 (0<x<1) spinel ferrites obtained by sol-gel synthesis

Zorka Vasiljević1, Milena Dojčinović2, Vera Pavlovic3, Jelena Vujančević1, Nenad Tadić3, Maria Vesna Nikolic2

1Institute of Technical Sciences of the Serbian Academy of Sciences and Arts, Belgrade, Serbia, 2Institute for Multidisciplinary Research, University of Belgrade, Serbia, 3Faculty of Mechanical Engineering, University of Belgrade, Serbia, 4Faculty of Physics, University of Belgrade, Serbia

P.S.C.6.      

High-performance supercapacitors based on core-shell structured carbon fibers@spinel oxide composites

Daniel Mijailović1, Vuk Radmilović2, Uroš Lačnjevac3, Dušica Stojanović2, Vladimir Jović1, Velimir Radmilović2,3, Petar Uskoković2

1University of Belgrade, Innovation Center, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120, Belgrade, Serbia; 2University of Belgrade, Institute for Multidisciplinary Research, Kneza Višeslava 1, 11030 Belgrade, Serbia; 3University of Belgrade, Faculty of Technology and Metallurgy, Karnegijeva 4, 11120, Belgrade, Serbia; 4Serbian Academy of Sciences and Arts, Knez Mihailova 35, 11000 Belgrade, Serbia

P.S.C.7.    

Citrate assisted solvothermal synthesis of b-NaYF4: Yb, Er up-converting nanoparticles

Ivana Dinić1, Marina Vuković1, Predrag Vulić2, Marko Nikolić3, Olivera Milošević4 and Lidija Mančić4

1Innovation Center of the Faculty of Chemistry, University of Belgrade, Serbia; 2Faculty of Mining and Geology, University of Belgrade, Serbia; 3Photonic Center, Institute of Physics Belgrade, University of Belgrade, Serbia; 4Institute of Technical Sciences of SASA, Belgrade, Serbia

P.S.C.8.    

Effect of rare earth elements (Eu3+, Sm3+, Yb3+/Er3+) doping on luminescence properties of Y2MoO6

Nadežda Stanković1, Nina Daneu2, Marko Nikolić3, Branko Matović1

1Vinča Institute of Nuclear Science, Belgrade, Serbia; 2Jožef Stefan Institute, Ljubljana, Slovenia; 3Institute of Physics Belgrade, Belgrade, Serbia

P.S.C.9.    

The effect of pH on visible-light photocatalytic properties of pseudobrookite nanoparticles

Zorka Vasiljević1, Milena Dojčinović2, Jelena Vujančević1, Nenad Tadić3, Maria Vesna Nikolic2

1Institute of Technical Sciences, Serbian Academy of Science and Arts, Belgrade, Serbia; 2Institute for Multidisciplinary Research, University of Belgrade, Belgrade, Serbia; 3Faculty of Physics, University of Belgrade, Belgrade, Serbia

P.S.C.10.

Ion-irradiation of ZrNb nanoscale multilayers

Miroslav Karlík1,2, Nabil Daghbouj3, Jan Lörinčík4, Tomáš Polcar3, Mauro Callisti5, Vladimír Havránek6

1Charles University, Faculty of Mathematics and Physics, Department of Physics of Materials, Ke Karlovu 5, 121 16 Prague 2, Czech Republic; 2Czech Technical University in Prague, Faculty of Nuclear Sciences and Physical Engineering, Department of Materials, Trojanova 13, 120 00 Praha 2, Czech Republic; 3Department of Control Engineering, Faculty of Electrical Engineering, Czech Technical University in Prague, Technická 2, 160 00 Prague 6, Czech Republic; 4Research Center Řež, Hlavní 130, 250 68, Husinec - Řež, Czech Republic; 5Department of Materials Science and Metallurgy, University of Cambridge, 27 Charles Babbage Road, Cambridge, CB3 0FS, United Kingdom; 6Nuclear Physics Institute CAS, v.v.i., Husinec - Řež 130, 250 68 Řež, Czech Republic

P.S.C.11.    

Orientation dependence of microstructure formation in Cu-8% at. Al single crystals

Dorota Moszczyńska1, Bogusława Adamczyk-Cieślak1, Milena Koralnik1, Tomasz Tokarski2, Jarosław Mizera1

1Warsaw University of Technology, Materials Science and Engineering Faculty, Warsaw, Poland; 2Academic Centre for Materials and Nanotechnology, AGH-University of Science and Technology, Cracow, Poland

P.S.C.12.    

Utilizing ion beam irradiation for structural modification of 12-tungstophosphoric acid

Željko Mravik1,2, Danica Bajuk-Bogdanović3, Ana Mraković4, Ivan Trajić1, Ljubiša Vukosavljević1, Davor Peruško5, Zoran Jovanović1,2

1Laboratory of Physics, Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia; 2CONVINCE, Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia; 3Faculty of Physical Chemistry, University of Belgrade, P.O. Box 47, 11158 Belgrade, Serbia; 4Laboratory of Theoretical Physics and Condensed Matter Physics, Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia; 5Laboratory of Atomic Physics, Vinča Institute of Nuclear Sciences, University of Belgrade, P.O. Box 522, 11001 Belgrade, Serbia

P.S.C.13.    

Rapid reaction of Mo2N nanowires with Pb2+ ions in water and its use for production of PbMoO4 nanoparticles

Aleš Mrzel1, Damjan Vengust1, Matejka Podlogar1,2, Mojca Vilfan1

1J. Stefan Institute, Jamova 39, 1000, Ljubljana, Slovenia; 2National Institute of Chemistry, Hajdrihova 19, 1000, Ljubljana, Slovenia

P.S.C.14.    

Consequences of confinement conditions on absorption in molecular nanofilms

Ana Šetrajčić–Tomić1, Matilda Vojnović1, Igor Šetrajčić2, Siniša Vučenović3, Jovan  Šetrajčić4.5

1University of Novi Sad, Faculty of Medicine, Novi Sad, Vojvodina, Serbia; 2University of Novi Sad, Faculty of Sciences, Novi Sad, Vojvodina, Serbia; 3University of Banja Luka, Faculty of Sciences, Banja Luka, Republic of Srpska, Bosnia and Herzegovina; 4University “Union – Nikola Tesla”, Faculty of Sport, Novi Beograd, Vojvodina, Serbia; 5Academy of Sciences and Arts of the Republic of Srpska, Banja Luka, Republic of Srpska, Bosnia and Herzegovina

 

 

Thursday, September 5, 2019

 

POSTER SESSION III: 2000-2200

 

Villa Mimoza

 

Chairpersons: Ivana Dinić and Veljko Đokić

YUCOMAT SYMPOSIUM C - NANOSTRUCTURED MATERIALS


P.S.C.15.    

Structural investigations of alloyed Al with TiCN nanopowder under load and tensile

Stefan Valkov1, Rumiana Lazarova2, Julia Goschkova3, Gizo Bokuchava3, Peter Petrov1

1E. Djakov Institute of electronics, Bulgarian Academy of Sciences, 72 Tzarigradsko chaussee, 1784 Sofia, Bulgaria; 2Institute of Metal Science, Equipment and Technologies with Hydro and Aerodynamics center, Bulgarian Academy of Sciences, 67 Shipchenski Prohod blvd., 1574 Sofia, Bulgaria; 3Frank Laboratory of Neutron Physics, Joint Institute for Nuclear Research, 6 Joliot-Curie Str., 141980 Dubna, Russia

P.S.C.16.    

Cubic silver nanoparticles fixed on TiO2 nanotubes as a simple and efficient substrates for surface enhanced Raman scattering

Robert Ambroziak1, Marcin Hołdyński2, Tomasz Płociński3, Marcin Pisarek2, Andrzej Kudelski1

1Faculty of Chemistry, University of Warsaw, Pasteur Str. 1, 02-093 Warsaw, Poland; 2Institute of Physical Chemistry Polish Academy of Sciences, Kasprzaka Str. 44/52, 01-224 Warsaw, Poland; 3Faculty of Materials Science and Engineering, Warsaw University of Technology, Woloska 141, 02-507, Warsaw, Poland

P.S.C.17.    

Formation of borides, silicides and boride-silicide powder composite materials by mechanical alloying

Marina Vasylkivska, Izabella Timofeeva

Frantsevich Institute for Problems of Materials Science of National Academy of Sciences of Ukraine, Kiev, Ukraine

P.S.C.18.    

Preparation of polylactide-kaolinite nanocomposite

András Kovács1, Éva Makó1, Norbert Miskolczi2

1Institute of Materials Engineering, University of Pannonia, Veszprém, Hungary; 2Institute of Chemical and Process Engineering, University of Pannonia, Veszprém, Hungary

 

YUCOMAT SYMPOSIUM D - ECO-MATERIALS AND ECO-TECHNOLOGIES

 

P.S.D.1.      

Identification and evaluation of changes and migration mechanisms of petroleum pollutant in the environment using the alkane fraction biological markers (river Vrbas, Bosnia and Herzegovina)

Ivan Samelak1, Milica Balaban1, Mališa Antić2, Tatjana Šolević-Knudsen3 and Branimir Jovančićević4

1Faculty of Natural Sciences and Mathematics, University of Banja Luka, Mladena Stojanovića 2, 78000 Banja Luka, Bosnia and Herzegovina; 2University in Belgrade, Faculty of Agriculture, Nemanjina 6, 11080, Belgrade, Serbia; 3Center of Chemistry, Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoševa 12, 11001 Belgrade, Serbia; 4University of Belgrade, Faculty of Chemistry, Studentski trg 12-16. 11001 Belgrade, Serbia

P.S.D.2.      

Potential application of activated carbonaceous materials for removing residual contaminants from complex biochemical and pharmacological mixtures

Branka Kaluđerović, Đuro Čokeša, Jelena Hranisavljević, Vesna Mandušić

INN Vinča, University of Belgrade, INN Vinča, P.O.Box 522, 11001 Belgrade, Serbia

P.S.D.3.      

The influence of modification and the particle size of the montmorillonite on the hydrolytic stability of urea-formaldehyde composite

S. Samaržija-Jovanović1, B. Petković1, T. Jovanović2, V. Jovanović1, G. Marković3, M. Marinović-Cincović4, J. Budinski-Simendić5

1University in Priština - Kosovska Mitrovica, Faculty of Sciences, 38220 Kosovska Mitrovica, Serbia, 2University of Niš, Faculty of  Sciences and Mathematics, 18106 Niš, Serbia, 3Tigar AD, 18300 Pirot, Serbia, 4University of Belgrade, Institute of Nuclear Science Vinča, 11000 Belgrade, Serbia, 5University of Novi Sad, Faculty of Technology, 21000 Novi Sad, Serbia

P.S.D.4.      

Group chase and escape in the presence of obstacles

Julija R. Šcepanovic, Aleksdandar Karač,  Zorica M. Jakšić,  Ljuba Budinski-Petković, Slobodan B. Vrhovac

Scientific Computing Laboratory, Center for the Study of Complex Systems, Institute of Physics Belgrade, University of Belgrade, Belgrade, Serbia

P.S.D.5.

Regulation of lipid production of Torulaspora globose yeast, cultivated in the medium with ethanol as a carbon source

Nadezda N. Stepanova1, Grigorii I. Morgunov2, and Svetlana V. Kamzolova1

1G.K. Skryabin Institute of Biochemistry and Physiology of Microorganisms, Federal Research Center "Pushchino Center for Biological Research of the Russian Academy of Sciences”, Pushchino, Moscow region, 142290 Russia; 2Peoples’ Friendship University of Russia (RUDN University), Moscow, 117198 Russia

 

YUCOMAT SYMPOSIUM E – BIOMATERIALS


P.S.E.1.      

Development of a 3D system for cancer cell studies

Jasmina Stojkovska1,2, Milena Milivojević3, Milena Stevanović3,4,5, Bojana Obradović1

1Faculty of Technology and Metallurgy, University of Belgrade, Belgrade, Serbia; 2Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia; 3Institute of Molecular Genetics and Genetic Engineering, University of Belgrade, Belgrade, Serbia; 4Faculty of Biology, University of Belgrade, Belgrade, Serbia; 5Serbian Academy of Sciences and Arts, Belgrade, Serbia

P.S.E.2.      

From wood to bone: how to convert wood structures into biomimetic hydroxyapatite scaffolds

Miklós Jakab, Margit Enisz-Bódogh

University of Pannonia, Institute of Materials Engineering, Veszprém, Hungary

P.S.E.3.      

Functionalization and biomimetics of insect photonic structures

Danica Pavlović1, Dejan Pantelić1, Branislav Salatić1, Dušan Grujić1, Svetlana Savić Šević1, Ljubiša Tomić2, Goran Dikić3, Branislav Jelenković1

1Institute of Physics Belgrade, University of Belgrade Pregrevica 118, 11080 Zemun, Belgrade, Serbia; 2Military Technical Institute, Ratka Resanovića 1, 11000 Belgrade, Serbia; 3The School of Electrical and Computer Engineering of Applied Studies, Vojvode Stepe 283, 11010 Belgrade, Serbia

P.S.E.4.      

Evaluation of colour modifications and surface morphology of dental composites

Marioara Moldovan1, Doina Prodan1, Codruta Sarosi1, George Popescu2, Amalia-Ionela Mazilu (Moldovan)2*, Violeta Popescu2

1Babes Bolyai University, “Raluca Ripan“ Chemistry Research Institute, Department of Polymer Composites, Cluj-Napoca, Romania; 2Physics and Chemistry Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania  

P.S.E.5.      

The morphology studies of different nanohybrid dental composites

Codruta Sarosi1, Ioan Petean2, Doina Prodan1, Cristina Prejmerean1, Marioara Moldovan1

1Babes Bolyai University, Institute of Chemistry Raluca Ripan, Cluj-Napoca, Romania; 2Babes Bolyai University, Faculty of Chemistry and Chemical Engineering, Cluj-Napoca, Romania

P.S.E.6.       The identification of branched-chain amino acids and the testing of the antibacterial effect of whey and soy protein powders

Violeta Popescu1, Marioara Moldovan2, Codruța Sarosi2, Mihaela Vlassa2, George Liviu Popescu1, Diana Elena David1, Ileana Cojocaru3, Doina Prodan2

1Physics and Chemistry Department, Technical University of Cluj-Napoca, Cluj-Napoca, Romania; 2Babeş Bolyai University, “Raluca Ripan“ Chemistry Research Institute, Department of Polymer Composites, Cluj-Napoca, Romania; 3University of Craiova, Craiova, Romania

P.S.E.7.      

Comparison of the carbon content in various biomasses based on calorimetric tests

Hadi Waisi1,2, Vladimir Dodevski3, Bojan Janković1, Marija Janković4, Nikola Živković5, Blažo Lalević6, Miloš Marinković7

1Laboratory of Physical Chemistry, University of Belgrade, Institute of Nuclear Sciences “Vinča”, Belgrade, Serbia; 2Faculty for Ecology and Environmental Protection, University Union-Nikola Tesla, Cara Dušana 62-64, 11000 Belgrade, Serbia; 3Laboratory for Materials Sciences, University of Belgrade, Institute of Nuclear Sciences “Vinča”, Belgrade, Serbia; 4Radiation and Environmental Protection Department, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Belgrade, Serbia; 5Laboratory for Thermal Engineering and Energy, Institute of Nuclear Sciences “Vinča”, University of Belgrade, Belgrade, Serbia, 6Department for Environmental Microbiology, Faculty of Agriculture, University of Belgrade, Belgrade, Serbia; 7Department of Chemistry, Faculty of Science and Mathematics, University of Niš, Niš, Serbia

P.S.E.8.

Hybrid bio-nanoentities with potential applications in biomedical field

Yulia Gorshkova1, Marcela Elisabeta Barbinta-Patrascu2, Gizo Bokuchava1, Nicoleta Badea3, Camelia Ungureanu3, Andrada Lazea-Stoyanova4, Angela Vlad4, Vitaly Turchenko1, Alexander Zhigunov5, Ewa Juszynska-Galazka6

1Joint Institute for Nuclear Research, Frank Laboratory of Neutron Physics, Dubna, Russia; 2University of Bucharest, Faculty of Physics, Department of Electricity, Solid-State Physics and Biophysics, Bucharest-Magurele, Romania; 3University “Politehnica” of Bucharest, Faculty of Applied Chemistry and Materials Science, General Chemistry Department, Bucharest, Romania; 4National Institute for Lasers, Plasma and Radiation Physics, Bucharest-Magurele, Romania; 5Institute of Macromolecular Chemistry AS CR, Prague, Czech Republic; 6Institute of Nuclear Physics, Polish Academy of Sciences, Krakow, Poland

 

WRTCS 2019


P.S.F.1.       

Sintering heating and cooling rates as a method of modifying electrical properties of BiFeO3 ceramics

Nikola Ilić1, Jelena Bobić1, Mirjana Vijatović Petrović1, Adis Džunuzović1, Biljana Stojanović2

1Institute for Multidisciplinary Research, University of Belgrade, Belgrade, Serbia; 2Academy of Engineering Sciences of Serbia, Belgrade, Serbia

P.S.F.2.       

Nickel ferrite/zinc ferrite nanopowder with core/shell structure: magnetic properties and sinterability

Ivan Stijepović, Marija Milanović, Andrea Nesterović, Jelena Vukmirović, Vladimir Srdić

University of Novi Sad, Faculty of Technology, Department of Materials Engineering, Novi Sad, Serbia

P.S.F.3.       

Sintering of scaffolds based on doped hydroxyapatite powders

Željko Radovanović1, Đorđe Veljović2, Rada Petrović2, Đorđe Janaćković2

1University of Belgrade, Innovation Center of the Faculty of Technology and Metallurgy, Belgrade, Serbia; 2University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia

P.S.F.4.       

Two-step sintered monophasic HAp dental inserts as materials for dentin replacement

Giuma Ayoub1, Maja Ležaja Zebić2, Vesna Miletić2, Rada Petrović1, Đorđe Veljović1, Đorđe Janaćković1

1University of Belgrade, Faculty of Technology and Metallurgy, Department of Inorganic Chemical Technology, Karnegijeva 4, 11120 Belgrade, Serbia; 2University of Belgrade, School of Dental Medicine, DentalNet Research Group, Rankeova 4, Belgrade, Serbia

P.S.F.5.       

Surface-selective laser sintering of ultrafine polymer powders. A new approach to high resolution three-dimensional printing

Svetlana A. Minaeva1, Maria A. Syachina1, Anton V. Mironov1, Nikita V. Minaev1, Eduards Krumins2, Steven M. Howdle2, Vladimir K. Popov1

1FSRC “Crystallography and Photonics“ RAS, Troitsk, Moscow, Russia; 2School of Chemistry, University of Nottingham University Park, Nottingham, United Kingdom

P.S.F.6.       

Influence of 3D-printing additive to freeze casting structure

Yueh-Ying Chou1, Po-Yu Chen1, Vojislav Mitić2,3, Goran Lazović4

1National Tsing Hua University, Taiwan; 2Institute Technical Sciences of SASA, Belgrade, Serbia; 3Faculty of Electronic Engineering University Nis, Serbia; 4Faculty of Mechanical Engineering University of Belgrade, Serbia

P.S.F.7.       

Resintering effect on high gamma phase content cemented carbide

Marco Mendez, Luis Garcia

Hyperion Materials & Technologies, Ind. Roca - C/ Verneda s/n, Martorelles, Barcelona 08107, Spain

member since 2008